1983 Austin Mini Mayfair

fuel cap seal slightly perished

Emissions not tested vehicle wont idle to assess emissions (8.2.1.2 (d))

Exhaust catalytic converter missing where one was fitted as standard (8.2.2.1 (a))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength floor plan jacking point bent inwards (5.3.6 (a) (i))

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Rear Sub-frame corroded and seriously weakened (5.3.3 (b) (i))

Rear fog lamp not working (4.5.1 (a) (ii))

Nearside Rear Wheel bearing play so excessive that directional control is impaired (5.1.3 (a) (ii)) DANGEROUS

Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sub frame mounting corroded body panels (5.3.6 (a) (ii)) DANGEROUS

Offside Rear Wheel bearing play so excessive that directional control is impaired (5.1.3 (a) (ii)) DANGEROUS

Stop lamp(s) all not working (4.3.1 (a) (iii)) DANGEROUS

All direction indicators not working (4.4.1 (a) (ii))

Front both brake flexible pipe fouling driveshaft

Oil leak, but not excessive engine and transmission (8.4.1 (a) (i))

Rear rear seat and belts missing

Sub-frame modified but not seriously weakened mounting bolts are just 8mm bolts and used big washers on floor plan that is weakened (5.3.3 (c) (i))

Suspension component mounting repair covered in underseal various (5.3.6 (a) (i))

battery not secured

Nearside Front sill corroded and holed outside 30cm

Offside Front sill corroded outside 30cm

Nearside Front wheel bearing has slight play (2.5.A.3c)

Offside Front Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Rear Brake pipe slightly corroded front to rears at junction to rear pipes (3.6.B.2c)

Offside Rear wheel bearing has slight play (2.6.2)

Nearside Front wheel bearing has slight play (2.5.A.3c)

Offside Front Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Front wheel bearing has excessive play (2.5.A.3c)

Offside Rear Brake pipe slightly corroded front to rears at junction to rear pipes (3.6.B.2c)

Offside Rear wheel bearing has slight play (2.6.2)

Exhaust has a minor leak of exhaust gases (7.1.2)

Exhaust noisy (7.1.4)

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front wheel bearing has slight play (2.5.A.3c)

Offside Rear wheel bearing has slight play (2.6.2)

Offside Steering rack gaiter deteriorated (2.2.D.2d)

osf sill to body slight corroded not within P/A

Nearside Front wheel bearing has slight play (2.5.A.3c)

Nearside Inner Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Outer Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Outer Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Inner Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Outer Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Outer Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Nearside Brake cable has a seized clevis joint pivot (3.5.1c)

Nearside Inner Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Outer Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Brake cable has a seized clevis joint pivot (3.5.1c)

Offside Inner Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front wheel bearing has slight play (2.5.A.3c)

Nearside Inner Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Outer Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Outer Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Inner Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Outer Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Outer Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Front Headlamp excessively damaged so that the light output is severely reduced (1.7.5a)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Shock absorber has a slightly reduced damping effect (2.7.5)

Offside Front Shock absorber has a slightly reduced damping effect (2.7.5)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Brakes imbalanced across an axle (3.7.B.5b)

Front Exhaust has a major leak of exhaust gases (7.1.2)

Hazard warning lamps not flashing in phase, with ignition off (1.4.B.1f)

Hazard warning lamps not flashing in phase, with ignition on (1.4.B.1f)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Ball joint has slight play (2.2.B.1f)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Offside Front Ball joint has slight play (2.2.B.1f)