MOT Status
ExpiredMileage
107,337 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Anti-roll bar pin or bush worn but not resulting in excessive movement both front (5.3.4 (a) (i))
Front Brake pipe corroded, covered in grease or other material both front (1.1.11 (c))
Front Suspension arm pin or bush worn but not resulting in excessive movement both front (5.3.4 (a) (i))
Rear Brake pipe corroded, covered in grease or other material both rear before and after flexi hose (1.1.11 (c))
Rear Shock absorbers has a slightly worn bush both rear (5.3.2 (c))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Nearside Rear Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) DANGEROUS
Front Anti-roll bar pin or bush worn but not resulting in excessive movement both front (5.3.4 (a) (i))
Front Brake pipe corroded, covered in grease or other material both front (1.1.11 (c))
Front Suspension arm pin or bush worn but not resulting in excessive movement both front (5.3.4 (a) (i))
Rear Brake pipe corroded, covered in grease or other material both rear before and after flexi hose (1.1.11 (c))
Rear Shock absorbers has a slightly worn bush both rear (5.3.2 (c))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement Rear bush showing signs of wear (5.3.4 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material To flexible hose (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing Cracking within the tread area (5.2.3 (d) (ii))
Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement Rear bush showing signs of wear (5.3.4 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material To flexible hose (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Items removed from driver's view prior to test From front windscreen ()
Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Brake pipe corroded, covered in grease or other material Front to rear going to brake flexible hose starting to corrode (1.1.11 (c))
Nearside Front Brake pipe corroded, covered in grease or other material To flexible hose starting to corrode (1.1.11 (c))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement Rear bush (5.3.4 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material Starting to corrode from flexible hose to wheel cylinder (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Brake pipe corroded, covered in grease or other material Front to rear going to brake flexible hose starting to corrode (1.1.11 (c))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement Rear bush (5.3.4 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material Starting to corrode from flexible hose to wheel cylinder (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Service brake excessively binding (1.2.1 (f))
Front Items removed from driver's view prior to test From front windscreen ()
Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Brake pipe corroded, covered in grease or other material Front to rear going to brake flexible hose starting to corrode (1.1.11 (c))
Nearside Front Brake pipe corroded, covered in grease or other material To flexible hose starting to corrode (1.1.11 (c))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement Rear bush (5.3.4 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material Starting to corrode from flexible hose to wheel cylinder (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Brake pipe corroded, covered in grease or other material Front to rear going to brake flexible hose starting to corrode (1.1.11 (c))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement Rear bush (5.3.4 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material Starting to corrode from flexible hose to wheel cylinder (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Exhaust system insecure (6.1.2 (a))
Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Brake pipe corroded, covered in grease or other material to rear x2 (1.1.11 (c))
Offside Rear tyre cracked and perrished
Oil leak, but not excessive (8.4.1 (a) (i))
Brake pipe slightly corroded both rears at unions (3.6.B.2c)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened inner edge (3.5.1i)
Exhaust system not adequately supported front mount (7.1.1)
Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Supplementary Restraint System warning lamp indicates a fault (5.4.2)
front brake application uneven (3.7.B.2)
Offside Front Brake pad(s) wearing thin (3.5.1g)
slight corrosion front discs
Nearside Rear Registration plate lamp not working (1.1.C.1d)
Offside Rear Registration plate lamp not working (1.1.C.1d)
Front Brake pad(s) wearing thin (3.5.1g)
n/s/f o/s/f tyre wear inside edge
Coolant leak
Front wiperblade rubber starting to split
How Reliable is the Peugeot 107?
Based on 2,229,410 MOT tests across 139,779 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
AT57 FFH is a 2007 Peugeot 107 in Black with a 998cc petrol engine. This vehicle has been through 19 MOT tests with a personal pass rate of 68.4%.
Across all 2007 Peugeot 107 models, the average MOT pass rate is 74.0% with a typical mileage of 56,654 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 107 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 42,280 recorded failures. If you're considering buying AT57 FFH, it's worth having these areas checked by a mechanic before committing.
The Peugeot 107 typically stays on UK roads for around 21 years. At 19 years old, this Peugeot 107 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of AT57 FFH?
You can check the full history of AT57 FFH by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was AT57 FFH registered?
AT57 FFH is a 2007 Peugeot 107, first registered on 22 December 2007.
Is AT57 FFH safe to buy?
The MOT history for AT57 FFH shows 19 tests with a 68.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does AT57 FFH have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on AT57 FFH. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.