2008 Honda Jazz

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Headlamp lens slightly defective (4.1.1 (b) (i))

Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Headlamp lens slightly defective (4.1.1 (b) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Brake pedal wearing smooth (1.1.2 (c))

Fuel Pipe/s corroded

Mechanical components corroded

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))

Exhaust has a major leak of exhaust gases Back box (6.1.2 (a))

Headlamp lens seriously defective (4.1.1 (b) (ii))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Brake pedal wearing smooth (1.1.2 (c))

Fuel Pipe/s corroded

Mechanical components corroded

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Brake pedal wearing smooth (1.1.2 (c))

Fuel hose deteriorated Filler pipe (6.1.3 (c) (ii))

Headlamp lens slightly defective (4.1.1 (b) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Suspension components corroded

Brake pedal wearing smooth (1.1.2 (c))

Fuel hose corroded Filler pipe (6.1.3 (c) (ii))

Headlamp lens slightly defective (4.1.1 (b) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Nearside Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Brake pedal wearing smooth (1.1.2 (c))

Fuel hose corroded Filler pipe (6.1.3 (c) (ii))

Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge On limit (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Nail in tyre

Nearside Rear Brake pad(s) wearing thin brake disc overheated (3.5.1g)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)