2002 Peugeot Boxer

Front Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Offside Front Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)

all welded repairs heavily undersealed but all seem a good standard at test time

near side and off side rear wheel arch bottoms /rear valances corroded but not in structural zone

near side central door step/sill has signs of some corrosion/weakening but o k at test time

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Rear Stop lamp not working (1.2.1b)

Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Shock absorber has a serious fluid leak (2.7.3)

Offside rear brake recording little or no effort (3.7.B.5a)

Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

rear brake application uneven (3.7.B.2)

Front Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

vehicle has had extensive welding but all seem ok at time of test

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Rear fog lamp not working (1.3.2b)

Rear fog lamp tell tale not working (1.3.1b)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

vehicle has had extensive welding but all seem ok at time of test

Nearside Front constant velocity joint is insecure (2.5.C.1b)

Nearside Front wheel bearing has excessive play (2.5.A.3c)

Nearside Front wheel bearing rough when rotated (2.5.A.2)

Nearside Rear Direction indicator incorrect colour (1.4.A.2f)

Nearside rear brake binding (3.7.B.1)

Offside Front Direction indicator incorrect colour (1.4.A.2f)

Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Front Track rod end ball joint has excessive play (2.2.B.1f)

Offside Rear Direction indicator incorrect colour (1.4.A.2f)

Offside Rear Leaf spring fractured (2.4.B.1a)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Parking brake lever has no reserve travel (3.1.6b)

Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Direction indicator slightly discoloured (1.4.A.2f)

both near side and off side front chassis rails around flexy mounting points showing signs of corrosion , o k at test time

Nearside Front wheel bearing has slight play (2.5.A.3c)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front wheel bearing has slight play (2.5.A.3c)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

O/S/F tyre close to limit

Slight play N/S/F bottom ball joint

Slight play N/S/F wheel bearing

Child seat fitted not allowing full inspection of adult belt

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Child seat fitted not allowing full inspection of adult belt

Nail in nearside rear tyre

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

n/s rear tyre slihtly deteriorated

advise n/s rear tyre sidewall perrished

Hazard warning tell tale not working correctly (1.4.B.1e)

Nearside Headlamp aim too high (1.8)

Nearside Registration plate lamp not working (1.1.5c)

Nearside brake disc excessively pitted (3.5.1h)

Offside Front constant velocity joint gaiter split (2.5.C.1a)

Offside Headlamp aim not tested (1.8.A.1c)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Registration plate lamp not working (1.1.5c)

Offside brake disc excessively pitted (3.5.1h)

advise n/s rear tyre sidewall perrished

Front Tyre worn close to the legal limit (4.1.E.1)

bolt missing from turbo bracket

cat broke up and ratteling

pin hole in o/s/f c/v gator

warning light on dash

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Front constant velocity joint gaiter split (2.5.C.1a)