MOT Status
ExpiredMileage
77,676 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Headlamp aim too high (1.8)
Nearside Rear Registration plate lamp not working (1.1.C.1d)
Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Headlamp aim too low (1.8)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Rear Brake hose ferrule excessively corroded (3.6.B.4e)
Service brake: efficiency below requirements (3.7.B.7) DANGEROUS
Front Power steering pipe(s) or hose(s) slightly corroded (2.3.2)
Offside Front Brake pipe modified but not seriously weakened (3.6.A.3)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
o/s/f tyre scrubbed on inner edge
spare wheel deflated
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Power steering fluid level low, but not below minimum (2.3.1)
Front Power steering pipe(s) or hose(s) slightly corroded (2.3.2)
Nearside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear wheel bearing has slight play (2.6.2)
Rear Tyre worn close to the legal limit (4.1.E.1)
fuel filter corroded
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Front Power steering pipe(s) or hose(s) slightly corroded (2.3.2)
Nearside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear wheel bearing has slight play (2.6.2)
Rear Tyre worn close to the legal limit (4.1.E.1)
fuel filter corroded
Front front brake juddering slightly (3.7.A.2b)
Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Brake hose ferrule excessively corroded (3.6.B.4e)
Nearside Outer Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Outer Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Brake hose ferrule excessively corroded (3.6.B.4e)
Offside Headlamp aim too low (1.8)
Offside Rear wheel bearing rough when rotated (2.6.1)
Front front brake juddering slightly (3.7.A.2b)
emmisions not checked
Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear position lamp(s) not working (1.1.A.3b)
Nearside Rear wheel bearing rough when rotated (2.6.1)
Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Rear coil spring fractured (2.4.C.1a)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Oil leak
Nearside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)
Offside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)
Nearside Front Shock absorber has a light misting of oil (2.7.3)
Nearside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)
Nearside Front Shock absorber has a light misting of oil (2.7.3)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
AU02 SBY is a 2002 Ford Ka in Blue with a 1,299cc petrol engine. This vehicle has been through 13 MOT tests with a personal pass rate of 61.5%.
Across all 2002 Ford Ka models, the average MOT pass rate is 65.6% with a typical mileage of 48,988 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying AU02 SBY, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 24 years old, this Ford Ka is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of AU02 SBY?
You can check the full history of AU02 SBY by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was AU02 SBY registered?
AU02 SBY is a 2002 Ford Ka, first registered on 28 June 2002.
Is AU02 SBY safe to buy?
The MOT history for AU02 SBY shows 13 tests with a 61.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does AU02 SBY have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on AU02 SBY. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.