MOT Status
ExpiredMileage
97,386 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Front Upper Suspension component missing suspension cup and bearing missing (5.3.3 (a) (ii)) DANGEROUS
Indicator switch faulty (4.4.2 (a) (i))
Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Rear Suspension component pin or bush slightly worn radius arm Bearing (5.3.4 (a) (i))
Offside Rear Tyre slightly damaged/cracking or perishing is cracking (5.2.3 (d) (ii))
Oil leak, but not excessive engine (8.4.1 (a) (i))
Fluid leak, but not excessive coolant leak from radiator (8.4.1 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component pin or bush slightly worn radius arm bearing (5.3.4 (a) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Headlamp aim too high (4.1.2 (a))
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Nearside Front Upper Macpherson strut attachment bracket/mounting insecure and impairing directional stability (5.3.3 (a) (ii)) DANGEROUS
Fluid leak, but not excessive coolant leak from radiator (8.4.1 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Indicator switch faulty (4.4.2 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component pin or bush slightly worn radius arm bearing (5.3.4 (a) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Suspension arm attachment bracket/mounting damaged and seriously weakened (5.3.3 (b) (i))
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Offside Rear Position lamp not working (4.2.1 (a) (ii))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Rear Direction indicator slightly discoloured (4.4.3 (a))
Nearside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security by top suspension mount (6.2.2 (d) (i))
Offside Front Tyre obviously under inflated (5.2.3 (l))
Offside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Rear Tyre obviously under inflated (5.2.3 (l))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
Nearside Front Coil spring corroded (5.3.1 (b) (i))
Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Offside Front Coil spring corroded (5.3.1 (b) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Front Exhaust mounting defective (6.1.2 (a))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Headlamp aim too high (1.8)
Nearside Stop lamp not working (1.2.1b)
Offside Headlamp aim too high (1.8)
Nearside Stop lamp not working (1.2.1b)
Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Headlamp aim too high (1.8)
Offside Front Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Front Exhaust has part of the system slightly deteriorated (7.1.1a)
Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Ball joint has slight play (2.2.B.1f)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
How Reliable is the Peugeot 206?
Based on 9,831,622 MOT tests across 644,158 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
AU02 SLV is a 2002 Peugeot 206 in White with a 1,124cc petrol engine. This vehicle has been through 30 MOT tests with a personal pass rate of 73.3%.
Across all 2002 Peugeot 206 models, the average MOT pass rate is 67.0% with a typical mileage of 65,592 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Peugeot 206 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 446,851 recorded failures. If you're considering buying AU02 SLV, it's worth having these areas checked by a mechanic before committing.
The Peugeot 206 typically stays on UK roads for around 28 years. At 24 years old, this Peugeot 206 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of AU02 SLV?
You can check the full history of AU02 SLV by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was AU02 SLV registered?
AU02 SLV is a 2002 Peugeot 206, first registered on 21 March 2002.
Is AU02 SLV safe to buy?
The MOT history for AU02 SLV shows 30 tests with a 73.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does AU02 SLV have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on AU02 SLV. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.