2002 Peugeot 206

Nearside Rear Shock absorbers has an excessively worn bush (5.3.2 (c))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Windscreen damaged and affecting the driver's view of the road (3.2 (a) (ii))

both front tyres close to limit

N/S Headlamp Lower bracket broken - Headlamp still secure / In Position

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Brake load sensing valve seized (3.6.E.3)

Nearside Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Seat belt anchorage prescribed area is excessively corroded Outer Sill (5.2.6)

Nearside Rear Direction indicator incorrect colour (1.4.A.2f)

Nearside Rear Suspension component mounting prescribed area is excessively corroded Outer Sill (2.4.A.3)

Nearside Stop lamp not working (1.2.1b)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

N/S Headlamp Lower bracket broken - Headlamp still secure / In Position

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Direction indicator incorrect colour (1.4.A.2f)

Nearside Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)

Nearside Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Nearside Front Lower Anti-roll bar has slight play in a ball joint (2.4.G.2)

O/S/R tyre has slight cracks on outer sidewall and between tread.

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Headlamp aim too low (1.8)

Nearside Front Lower Anti-roll bar has slight play in a ball joint (2.4.G.2)

Nearside Headlamp not working on dipped beam (1.7.5a)

O/S/R tyre has slight cracks on outer sidewall and between tread.

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Headlamp aim too low (1.8)

Offside Front Bonded suspension unit bonding failed and part of unit is likely to become displaced (2.4.F.2)

Offside Front Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Headlamp aim too low (1.8)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)

Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear position lamp(s) not working (1.1.A.3b)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Offside Front position lamp(s) not working (1.1.A.3b)

front pipe weak and has slight blow

n/s/r tyre getting low on outer edge

oil leak

Brake load sensing valve linkage seized (3.6.E.3)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Offside Front brake disc in such a condition that it is seriously weakened (3.5.1i)

front pipe weak and has slight blow

n/s/r tyre getting low on outer edge

oil leak

Brake load sensing valve linkage stiff (3.6.E.3)