MOT Status
ExpiredMileage
110,357 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Central Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
fuel tank strap corroded
Central Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Headlamp aim too high (4.1.2 (a))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
fuel tank strap corroded
Central Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
fuel tank strap corroded
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Position lamp not working (4.2.1 (a) (ii))
Offside Front Coil spring fractured or broken (5.3.1 (b) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Mudguard insecure ()
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
all rear brake pipes corroded / covered in grease
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Coil spring corroded (5.3.1 (b) (i))
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Exhaust emits excessive smoke or vapour likely to obscure the vision of other road users (8.2.2.2 (c)) DANGEROUS
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Coil spring corroded (5.3.1 (b) (i))
Exhaust emissions exceed level of metered smoke for a turbo charged engine (8.2.2.2 (b))
Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))
Exhaust emits visible black smoke at idle (8.2.1.2 (f))
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Exhaust emits excessive smoke or vapour of any colour (7.4.B.4)
Nearside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside front brake binding (3.7.B.1)
Rear Brake load sensing valve seized (3.6.E.3)
Exhaust emits an excessive level of metered smoke for a turbo charged engine excessive high emissions (7.4.B.3b)
Parking brake: efficiency below requirements (3.7.B.7)
Stop lamp not working o/side rear brake light not working (1.2.1b)
coil spring broken n/side front coil spring broken (2.4.C.1a)
o/s sill corroded/weak
Nearside Outer Seat belt anchorage prescribed area is excessively corroded (5.2.6)
o/s sill corroded/weak
Offside Rear Braking system leaking (3.6.A.1)
Offside rear brake recording little or no effort (3.7.B.5a)
Parking brake: efficiency below requirements (3.7.B.7)
o/s/r radius arm siezed
Brakes imbalanced across an axle (3.7.B.5b)
Offside Front brake caliper has restricted free movement (3.5.1k)
Offside Front brake disc in such a condition that it is seriously weakened (3.5.1i)
How Reliable is the Peugeot 206?
Based on 9,831,622 MOT tests across 644,158 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
AU03 PUH is a 2003 Peugeot 206 in Red with a 1,398cc diesel engine. This vehicle has been through 28 MOT tests with a personal pass rate of 67.9%.
Across all 2003 Peugeot 206 models, the average MOT pass rate is 68.8% with a typical mileage of 62,409 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 206 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 446,851 recorded failures. If you're considering buying AU03 PUH, it's worth having these areas checked by a mechanic before committing.
The Peugeot 206 typically stays on UK roads for around 28 years. At 23 years old, this Peugeot 206 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of AU03 PUH?
You can check the full history of AU03 PUH by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was AU03 PUH registered?
AU03 PUH is a 2003 Peugeot 206, first registered on 1 March 2003.
Is AU03 PUH safe to buy?
The MOT history for AU03 PUH shows 28 tests with a 67.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does AU03 PUH have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on AU03 PUH. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.