2003 Peugeot 206

Gearbox mounting defective

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Service brake excessively binding (1.2.1 (f))

Offside Front Service brake excessively binding (1.2.1 (f))

Gearbox mount cracking/worn

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Central engine mount cracked perished

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both cracked perished (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Shock absorbers has negligible damping effect both (5.3.2 (d))

Central engine mount cracked perished

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both cracked perished (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Central Front Vehicle structure is fractured but structural rigidity is not significantly reduced damage to underbody (6.1.1 (a) (i))

Front Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Front Coil spring corroded both (5.3.1 (b) (i))

Front Oil leak, but not excessive (8.4.1 (a) (i))

Front Suspension component corroded but not seriously weakened both top mounts (5.3.3 (b) (i))

Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Oil leak, but not excessive engine (8.4.1 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Front Headlamp has a product on the lens but not seriously reducing light output headlamp covers fitted (4.1.4 (b))

Nearside Rear Suspension component pin or bush slightly worn support arm bush (5.3.4 (a) (i))

Offside Rear Suspension component pin or bush slightly worn support arm bush (5.3.4 (a) (i))

Rear Position lamp slightly affected by the operation of another lamp (4.2.3 (c))

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords 175/65/14 (5.2.3 (d) (i))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i))

Front Headlamp has a product on the lens but not seriously reducing light output headlamp covers fitted (4.1.4 (b))

Nearside Rear Suspension component pin or bush slightly worn support arm bush (5.3.4 (a) (i))

Offside Rear Suspension component pin or bush slightly worn support arm bush (5.3.4 (a) (i))

Rear Position lamp slightly affected by the operation of another lamp (4.2.3 (c))

Nearside Rear Tyre worn close to the legal limit 2-2.5 m worn low on edges 175/65/14 (4.1.E.1)

Offside Rear Tyre worn close to the legal limit 2-2.5 m worn low on inside edge 175/65/14 (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Upper Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Exhaust system not adequately supported rear silencer bracket broken (7.1.1)

Nearside Front Bonded suspension unit bonding failed and part of unit is likely to become displaced wish bone rear bush (2.4.F.2)

Offside Front Bonded suspension unit bonding failed and part of unit is likely to become displaced wish bone rear bush (2.4.F.2)

Offside Front Brake hose twisted (found during steering lock to lock check) (2.2.D.2b)

Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)

Rear Tie bar/rod has slight play in a pin/bush (2.4.G.2)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Brake load sensing valve seized (3.6.E.3)

Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)

Rear Tie bar/rod has slight play in a pin/bush (2.4.G.2)

Service brake: efficiency below requirements (3.7.B.7)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Service brake: efficiency below requirements (3.7.B.7)

Rear Rear fog lamp not working (1.3.2b)

Headlamp aim too high (1.8)

Rear Brake load sensing valve linkage seized (3.6.E.3)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)