2004 Piaggio Vespa GT 125

Brake disc(s) slightly worn front and rear (3.2.A1l)

Front Front suspension spring corroded but not seriously weakened (2.3.2b)

Front Lower Motorcycle structure slightly corroded mid section (6.1.1a)

Motorcycle structure slightly corroded (6.1.1a)

Motorcycle structure slightly damaged dents in frame (6.1.1a)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear suspension bush has slight free play engine mounting bushes (2.4.A2a(i))

Exhaust excessively deteriorated (7.1.1a)

Exhaust is leaking and excessively noisey (7.1.1b)

Headlamp aim not tested low beam not working (1.6)

Brake disc(s) slightly worn front and rear (3.2.A1l)

Front Front suspension spring corroded but not seriously weakened (2.3.2b)

Front Lower Motorcycle structure slightly corroded mid section (6.1.1a)

Rear Brake pad(s) close to minimum limit (3.2A1f(ii))

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear suspension bush has slight free play engine mounting bushes (2.4.A2a(i))

Exhaust is leaking but is not excessively noisey (7.1.1b)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Exhaust is leaking and excessively noisey (7.1.1b)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Headlamp aim too low (1.6)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear suspension bearing has slight free play (2.4.A2a(i))

Steering movement slightly 'notchy' (2.2.1a)

Headlamp aim too high (1.6)

Rear Brake lever is so short and the brake cannot be readily applied (3.1.3c)

Steering movement slightly 'notchy' (2.2.1a)