2006 Gilera Rcr

Front Brake fluid reservoir fluid level below minimum level (1.1.10 (d) (i))

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Headlamp light intensity severely reduced (4.1.4 (a))

Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (b))

Front Brake fluid reservoir fluid level below minimum level (1.1.10 (d) (i))

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Exhaust slightly loose (6.1.2 (a))

Rear Brake binding but not excessively (1.2.1 (f))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Steering headbearing has slight free play (2.2.2 (f) (i))

Nearside Front Wheel excessively distorted (5.2.2 (c) (i))

Offside Front Direction indicator not working (4.4.1 (a) (ii))

Rear Shock absorber has negligible damping effect (5.3.2 (b))

Rear Stop lamp not working (4.3.1 (a) (ii))

Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Rear reflector missing (4.8.2 (a) (ii))

Suspension component pin or bush excessively worn Swing arm (5.3.4 (a) (i))

Wheel alignment incorrect which adversely affects the handling (2.4 (a))

Exhaust slightly loose (6.1.2 (a))

Front brake resovior bolt loose

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Brake binding but not excessively (1.2.1 (f))

Offside Direction indicator not working (4.4.1 (a) (ii))

Rear Brake binding but not excessively (1.2.1 (f))

Exhaust noisy (8.1.1 (a))

Exhaust noisy (8.1.1 (a))

Headlamp light intensity reduced (4.1.4 (a))

Riders seat slightly loose (6.2.5 (a) (ii))

rear footrests are present but zip tied up

Rear Brake disc(s) slightly scored (3.2.A1l)

Direction indicators not working Left - F & R (1.5.1c)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Locking device(s) not correctly fitted which may make the motor bicycle dangerous to ride Chain clip fitted backwards (6.2.1h)

Rear Roller brake test indicates a severely grabbing brake (3.3.A1b)

Rear Roller brake test indicates excessive fluctuation of brake effort (3.3.A1d)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Drive chain worn but not considered excessive (6.2.1e)

Exhaust noisy (7.1.2)

Front Front wheel bearings are slightly rough (2.3.5b)

Front Front wheel bearings have slight free play (2.3.5b)

Rear shock absorber has a light misting (2.4.A.1c)

Wheel alignment slightly misaligned. (2.5.1)

Headlamp insecure (1.2.3b)

Horn not loud enough to be heard by another road user (1.7.3a)

Rear suspension component loose trailing arm (2.4.A.1a)

rear brake lever poorly positioned

Drive chain worn but not considered excessive (6.2.1e)

Exhaust noisy (7.1.2)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Drive chain worn but not considered excessive (6.2.1e)

Exhaust noisy (7.1.2)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front wheel spindle securing nut locking device missing (2.3.3a)

Front Brake disc(s) slightly scored (3.2.A1l)

Rear Brake disc(s) slightly worn (3.2.A1l)

Drive chain worn but not considered excessive (6.2.1e)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Wheel spoke slightly loose. (4.2.1b)

Rear Wheel spoke slightly loose. (4.2.1b)