2006 Mazda 3

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Oil leak, but not excessive (8.4.1 (a) (i))

Brake disc worn, pitted or scored, but not seriously weakened Both fronts (1.1.14 (a) (ii))

Brake disc worn, pitted or scored, but not seriously weakened Both rears (1.1.14 (a) (ii))

Front and rear suspension components showing signs of corrosion.

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Underside of vehicle showing signs of corrosion.

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Brake disc worn, pitted or scored, but not seriously weakened Both fronts (1.1.14 (a) (ii))

Brake disc worn, pitted or scored, but not seriously weakened Both rears (1.1.14 (a) (ii))

Front and rear suspension components showing signs of corrosion.

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Underside of vehicle showing signs of corrosion.

Brake disc worn, pitted or scored, but not seriously weakened front/rear (1.1.14 (a) (ii))

Suspension arm pin or bush worn but not resulting in excessive movement both front (5.3.4 (a) (i))

Suspension component corroded but not seriously weakened both front and rear subframes and suspension arms heavily corroded (5.3.3 (b) (i))

Tyre has a cut in excess of the requirements deep enough to reach the ply or cords both front (5.2.3 (d) (i))

Brake disc worn, pitted or scored, but not seriously weakened front/rear (1.1.14 (a) (ii))

Suspension arm pin or bush worn but not resulting in excessive movement both front (5.3.4 (a) (i))

Suspension component corroded but not seriously weakened both front and rear subframes and suspension arms heavily corroded (5.3.3 (b) (i))

Brake pipe corroded, covered in grease or other material all pipes (1.1.11 (c))

Tyre slightly damaged/cracking or perishing both front (5.2.3 (d) (ii))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i))

Offside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Brake pipe corroded, covered in grease or other material all pipes (1.1.11 (c))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Tyre slightly damaged/cracking or perishing both front (5.2.3 (d) (ii))

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Offside Front Front position lamp(s) has less than 50% of the light sources illuminating (1.1.A.3b)

Offside Front Seat belt insecurely fixed to the seat (5.2.1a)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

both front and offside rear tyres getting close to wear bars

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)