2007 Yamaha NXC125

Centre stand spring weak, not retracting fully.

Exhaust noisy (8.1.1 (a))

Rear Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Central center stand not fully detracting

Front Headlamp aim projected beam image obviously incorrect lamp does not look to be seated in holder (4.1.2 (c))

Front Shock absorber has negligible damping effect front forks have no movement/travel at all (5.3.2 (b))

Rear Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Central center stand not fully detracting

Motorcycle structure is corroded but structural rigidity is not significantly reduced Swinging arm holding engine to frame is corroded (6.1.1 (c) (i))

Headlamp aim too high (4.1.2 (a))

Motorcycle structure is corroded but structural rigidity is not significantly reduced Swinging arm holding engine to frame is corroded (6.1.1 (c) (i))

slight bind detected when front wheel turned by hand but nothing detected when tested in RBT

Exhaust slightly deteriorated (7.1.1a)

Front Roller brake test indicates a binding brake (3.3.A1a)

Exhaust slightly deteriorated (7.1.1a)

fork stanchions pitted

slight bind detected when front wheel turned by hand but nothing detected when tested in RBT

n/s + o/s/f upper fork stanchions pitted .

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Tyre valve stem damaged which could cause sudden tyre deflation (4.1.2c)

n/s + o/s/f upper fork stanchions pitted .

Rear Tyre valve stem slightly damaged (4.1.2c)

n/s + o/s/f fork sfanchions upper sections corroded .

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Rear Tyre valve stem slightly damaged (4.1.2c)

Steering movement slightly stiff (2.2.1b)

n/s + o/s/f fork sfanchions upper sections corroded .

Exhaust mounting missing (7.1.1c)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front suspension assembly slightly corroded. (2.3.1)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front suspension assembly slightly corroded. (2.3.1)

Rear Tyre has a lump caused by separation or partial failure of its structure (4.1.2a(ii))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))