2012 Zontes Zt 125-8A Panther

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Steering movement slightly 'notchy' (2.2.1a)

Front Brake hose is likely to be fouled or trapped by moving parts (3.2.B2c)

Position lamp switch faulty (1.1.4a)

Wheel alignment incorrect which adversely affects the handling (2.5.1)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Steering control chaffing between components and not interfering with free movement of steering throttle cable incorrectly routed (2.1.2a)

Steering movement slightly 'notchy' (2.2.1a)

headlamps and horn operation affected by faulty ignition switch

Drive chain excessively tight (6.2.1d)

Drive chain worn to excess (6.2.1e)

Front Brake lever has inadequate reserve travel (3.1.3b)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Nearside Rear Footrest missing (6.2.1a)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear reflector on motorcycle missing (1.4.1)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Rear wheel bearings have slight free play (2.4.A.2c)

Drive chain slightly tight (6.2.1d)

Front Inner Brake pad(s) close to minimum limit (3.2.A1f(i))

Steering movement slightly 'notchy' (2.2.1b)

one position lamp working on front

Direction indicators flashing more than 120 times per minute (1.5.1c)

Steering headbearing has excessive free play (2.2.2)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Drive chain slightly tight (6.2.1d)

Front Inner Brake pad(s) close to minimum limit (3.2.A1f(i))

one position lamp working on front

Direction indicators not working (1.5.1c)

Steering headbearing has excessive free play (2.2.2)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)