2003 Seat Inca

Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Suspension arm corroded but not seriously weakened both sides (5.3.3 (b) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Leaf spring shackle bracket corroded but not seriously weakened (5.3.1 (b) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Lower Rear fog lamp not working (4.5.1 (a) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg inside wheel arch (5.3.6 (a) (i))

Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Suspension arm corroded but not seriously weakened both sides (5.3.3 (b) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Leaf spring shackle bracket corroded but not seriously weakened (5.3.1 (b) (i))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Fuel cap/sealing device missing filler cap missing leaving shaft edges (6.1.3 (b) (i))

Nearside Front Direction indicator incorrect colour (4.4.3 (a))

Nearside Front Service brake excessively binding (1.2.1 (f))

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Rear Direction indicator incorrect colour (4.4.3 (a))

Offside Side repeater incorrect colour (4.4.3 (a))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Nearside Front Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Nearside Front Suspension component mounting prescribed area is excessively corroded chassis (2.4.A.3)

Nearside Rear Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Headlamp aim too high (1.8)

Offside Stop lamp not working (1.2.1b)

Registration plate lamp not working (1.1.C.1d)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Nearside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Nearside Front brake disc repaired, but not inappropriately new disc fitted,solid,not vented like o/s/f.not affecting braking or rbt readings (3.5.1n)

Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

both rear tyres slightly perished on sidewall/treads

n/s/f wiper just beginning to smear screen

rear exhaust rubber missing,but exhaust still secure and on other mountings

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Outer Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Outer Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Supplementary Restraint System warning lamp indicates a fault (5.4.2)

Brake pipe slightly corroded (3.6.B.2c)

Brake hose bulging under pressure (3.6.B.3)

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside front brake binding (3.7.B.1)

Rear Brake load sensing valve seized (3.6.E.3)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

Brake pipe slightly corroded (3.6.B.2c)

Front front brake binding (3.7.B.1)

Offside Registration plate lamp not working (1.1.C.1d)

Brake pipe slightly corroded (3.6.B.2c)

Brake pipe slightly corroded (3.6.B.2c)

all other brake pipes greased and rusty and hard to access

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

slight bind nearside front brake

Centre rear stop light has no bulb holder

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Nearside Front Steering system has slight free play detected at steering wheel (2.2.A.1b)

Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Rear springs slightly out of line

Spare wheel holder has no wheel & loose

Nearside Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Play at NSF wheel if held at 3.45 position

Rear exkaust corrodding

Front exhaust mounting bracket broken

Front tyres worn on inner edges

Offside of front antiroll bar hitting on lower suspension arm

Rear exhaust box corroded

Slight wear in nearside of steering rack

High level brake light missing

N/S/R Tyre sidewall perished

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Front Front position lamp(s) not in good working order (function impaired) (1.1.4a)

Front brake pads low (2/3000 +/-)

High level brake light missing

N/S/R Tyre sidewall perished