2003 Toyota Corolla

Nearside Front Headlamp has a product on the light source but not seriously reducing light output (4.1.4 (b))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

under vehicle showing corrosion.

Nearside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Offside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Front Headlamp has a product on the light source but not seriously reducing light output (4.1.4 (b))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

under vehicle showing corrosion.

Central Rear Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Front Exhaust mounting defective (6.1.2 (a))

Front Headlamp has a product on the light source but not seriously reducing light output o/s&n/s (4.1.4 (b))

Front Suspension arm corroded but not seriously weakened o/s&n/s (5.3.3 (b) (i))

Central Rear Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Front Exhaust mounting defective (6.1.2 (a))

Front Headlamp has a product on the light source but not seriously reducing light output o/s&n/s (4.1.4 (b))

Front Suspension arm corroded but not seriously weakened o/s&n/s (5.3.3 (b) (i))

Front Windscreen washer not working (3.5 (a))

Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Front Exhaust mounting defective (6.1.2 (a))

Front Headlamp has a product on the lens but not seriously reducing light output o/s&n/s (4.1.4 (b))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

high level stop lamp not working

Engine management light illuminated indicating a fault

Headlamp has a product on the lens but not seriously reducing light output both (1.7.5a)

Parking brake lever has little reserve travel (3.1.6b)

brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

small chips in windsreen

corrosion to floorpans,sills,suspension mounts/components/pipes,front discs worn

Emissions not tested (7.3.A.1)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside rear brake binding (3.7.B.1)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

rear parking brake recording little or no effort (3.7.B.6a)

corrosion to floorpans,sills,suspension mounts/components/pipes,front discs worn

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Side repeater incorrect colour (1.4.A.2f)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Registration plate lamp not working (1.1.C.1d)

Offside Side repeater incorrect colour (1.4.A.2f)

sills/suspension mounts/components corroded

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Mechanical brake component has restricted free movement (3.5.1k)

Registration plate lamp not working (1.1.C.1d)

Nearside Front Lower Ball joint dust cover damaged, but preventing the ingress of dirt (2.2.C.1c)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Front Lower Ball joint dust cover damaged, but preventing the ingress of dirt (2.2.C.1c)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Nearside Front All position lamps have less than 50% of the light sources illuminating (1.1.A.3b)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Front All position lamps not working (1.1.A.3b)

Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Front Headlamp not working on dipped beam (1.7.5a)

Offside Front Headlamp not working on main beam (1.7.5a)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Headlamp not in good working order adversely affecting beam image (1.2.4a)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Headlamp not in good working order adversely affecting beam image (1.2.4a)

o/s/r brake binding slightly

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)