2003 Mercedes-benz Vito

Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear crossmember (6.1.B.2)

Brake load sensing valve seized (3.6.E.3)

Nearside Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2)

Nearside Front Brake pipe excessively corroded to rear (3.6.B.2c)

Nearside Front Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside front brake excessively fluctuating (3.7.B.3)

Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2)

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Side repeater incorrect colour (1.4.A.2f)

Offside front brake excessively fluctuating (3.7.B.3)

Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Brake pipe slightly corroded to rear (3.6.B.2c)

Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Oil leak from engine area

Parking brake lever has little reserve travel (3.1.6b)

Vehicle underside rusty

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Oil leak

Front Side repeater incorrect colour (1.4.A.2f)

Horn not working (1.6.2a)

Nearside Front coil spring broken (2.4.C.1a)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Driver's door cannot be opened from inside the vehicle (6.2.B.1b)

Offside Front Steering rack gaiter split (2.2.D.2d)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Oil leak

Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Oil leak

brake anti slip slightly worn

chip on windscreen

nearside body slight corrosion

offside body slight corrosion

offside inner sill dented

rear door hindges casing insecure

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Steering rack gaiter insecure (2.2.D.2d)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7)

rear parking brake recording little or no effort (3.7.B.6a)

Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Oil leak

Rear Brake pipe slightly corroded (3.6.B.2c)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

brake anti slip slightly worn

chip on windscreen

nearside body slight corrosion

offside body slight corrosion

offside inner sill dented

rear door hindges casing insecure

n/s inner and outer sill repairs visable

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Headlamp switch faulty (1.7.1)

Offside Rear rear brake binding (3.7.B.1)

Offside rear brake recording little or no effort (3.7.B.5a)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside brake disc in such a condition that it is seriously weakened (3.5.1i)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Registration plate lamp not working (1.1.5c)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Windscreen wiper blade deteriorated (8.2.2)

Windscreen wiper does not clear the windscreen effectively (8.2.2)