MOT Status
ExpiredMileage
90,151 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front tyre worn on inner edge
Nearside Rear number plate light dim
Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
bonnet release lever insecure
offside and nearside inner sills corroded
parking brake efficiency low
travel on parking brake
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Headlamp levelling device inoperative headlamp adjuster (4.1.5 (a))
Nearside Front Anti-roll bar attachment bracket/mounting insecure D bush bracket loose (5.3.3 (a) (i))
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Front tyre worn on inner edge
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
bonnet release lever insecure
offside and nearside inner sills corroded
parking brake efficiency low
travel on parking brake
Nearside Front lower ball joint slight wear
rear bumper mount corroded
Nearside Front Anti-roll bar has excessive play in a pin/bush (2.4.G.2)
Nearside Front wheel bearing rough when rotated (2.5.A.2)
Nearside Track rod end ball joint has excessive play (2.2.B.1f)
Offside Front Anti-roll bar has excessive play in a pin/bush (2.4.G.2)
Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Inner tail light not working
Offside Side repeater slightly discoloured (1.4.A.2f)
Rear Inner Brake pad(s) wearing thin (3.5.1g)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Tyre tread depth below requirements of 1.6mm 195/55/15 (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Headlamp aim too high (1.8)
Offside Registration plate lamp not working (1.1.C.1d)
Windscreen wiper does not clear the windscreen effectively both (8.2.2)
Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Inner tail light not working
Offside Side repeater slightly discoloured (1.4.A.2f)
Rear Inner Brake pad(s) wearing thin (3.5.1g)
Nearside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
How Reliable is the Proton GEN-2?
Based on 59,272 MOT tests across 4,783 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
AU56 BVW is a 2006 Proton GEN-2 in Blue with a 1,597cc petrol engine. This vehicle has been through 15 MOT tests with a personal pass rate of 66.7%.
Across all 2006 Proton GEN-2 models, the average MOT pass rate is 70.5% with a typical mileage of 46,408 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Proton GEN-2 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 2,238 recorded failures. If you're considering buying AU56 BVW, it's worth having these areas checked by a mechanic before committing.
The Proton GEN-2 typically stays on UK roads for around 22 years. At 20 years old, this Proton GEN-2 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of AU56 BVW?
You can check the full history of AU56 BVW by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was AU56 BVW registered?
AU56 BVW is a 2006 Proton GEN-2, first registered on 19 September 2006.
Is AU56 BVW safe to buy?
The MOT history for AU56 BVW shows 15 tests with a 66.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does AU56 BVW have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on AU56 BVW. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.