1986 Mercedes-benz 200

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Nail in tyre ()

Oil leak, but not excessive Gearbox (8.4.1 (a) (i))

Oil leak, but not excessive engine (8.4.1 (a) (i))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Front Drag link end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Headlamp not working on main beam (4.1.1 (a) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Nail in tyre ()

Oil leak, but not excessive Gearbox (8.4.1 (a) (i))

Oil leak, but not excessive engine (8.4.1 (a) (i))

Brake pipe corroded, covered in grease or other material all pipes (1.1.11 (c))

vehicle structure heavily under sealed restricting inspection

Brake performance not tested (3.7.A.1)

Central Brake actuating linkage mounting prescribed area is excessively corroded floor (3.3.A.2)

Exhaust emits dense blue smoke at idle (7.4.A.1)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Rear Suspension component mounting prescribed area is excessively corroded floor (2.4.A.3)

Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)

Nearside Rear position lamp(s) has less than 50% of the light sources illuminating (1.1.A.3b)

Nearside Seat belt anchorage prescribed area is excessively corroded centre door post (5.2.6)

Offside Front Seat belt insecurely fixed to the vehicles structure (5.2.1a)

Offside Rear Suspension component mounting prescribed area is excessively corroded floor (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded under sill (2.4.A.3)

Offside Rear position lamp(s) has less than 50% of the light sources illuminating (1.1.A.3b)

Offside Seat belt anchorage prescribed area is excessively corroded centre under floor (5.2.6)

Passenger's seat insecure (6.2.A.1)

Rear Exhaust system not adequately supported (7.1.1)

Driver's seat fore and aft adjustment mechanism not functioning as intended. (6.2.A.3)

Exhaust emits excessive dense blue smoke during acceleration (7.4.A2)

Nearside Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)

Offside Rear passenger door cannot be opened from outside the vehicle (6.2.B.1c)

Parking brake: efficiency below requirements (3.7.B.7)

Steering system has excessive free play detected at the steering wheel (steering box fitted) (2.2.A.1a)

Windscreen washer provides insufficient washer liquid (8.2.3)

Indicator switch faulty (1.4.A.1)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear rear brake binding (3.7.B.1)

Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Rear rear brake binding (3.7.B.1)

Windscreen washer provides insufficient washer liquid (8.2.3)

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS