2002 Suzuki GZ125

rear sprocket has movement

Offside Rear Direction indicator not working (4.4.1 (a) (ii))

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

engine idle high

rear sprocket has movement

Front Tyre worn close to the legal limit (5.2.3 (e))

Front Tyre worn close to the legal limit (5.2.3 (e))

Front Tyre worn close to the legal limit (5.2.3 (e))

Rear Brake excessively binding (1.2.1 (f))

Front Tyre worn close to the legal limit (5.2.3 (e))

Nearside Front Direction indicator not working (4.4.1 (a) (ii))

Wheel alignment incorrect which adversely affects the handling (2.4 (a))

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Rear Tyre worn close to the legal limit (5.2.3 (e))

Rear Brake excessively binding (1.2.1 (f))

Rear Suspension arm corroded and seriously weakened (5.3.3 (b) (i))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Front Wheel has an excessively distorted bead rim. (4.2.2)

Front Wheel spoke excessively loose (4.2.1b)

Offside Direction indicators not working (1.5.1c)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Drive chain excessively loose (6.2.1d)

Front Brake lever pivots excessively worn (3.1.3a)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Rear Exhaust mounting does not fully support the exhaust system (7.1.1.c)

Rear Stop lamp remains on when the brake is released (1.3.1e)

Rear Roller brake test indicates a sticking brake (3.3.A1a) DANGEROUS

Rear Brake pedal has inadequate reserve travel (3.1.3b)

Front wheel bearings have excessive free play (2.3.5b)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Wheel alignment incorrect which adversely affects the handling (2.5.1)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Tyre worn close to the legal limit (4.1.3(ii))

Brake pedal cannot be applied smoothly (3.1.3d)

Drive chain excessively tight (6.2.1d)

Floor brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.C1b)

Stop lamp remains on when the brake is released (1.3.1e)

Gear selector mechanism seized