2002 Yamaha FZS1000

Exhaust noisy (8.1.1 (a))

Frame modified but not considered dangerous

Rear Suspension components modified but not considered unsafe

Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Motorcycle structure is modified but structural rigidity is not significantly reduced (6.1.1 (d) (i))

Suspension attachment bracket modified but not seriously weakened rear swing arm (5.3.3 (c) (i))

Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Nearside Rear Direction indicator not working (4.4.1 (a) (ii))

Rear Wheel spindle locking device missing (5.2.1 (d))

Rear reflector missing (4.8.2 (a) (ii))

Registration plate does not conform to the specified requirements to small (0.1 (d))

Rear Stop lamp remains on when the brakes are released (4.3.2 (a) (iii)) DANGEROUS

Rear Wheel fixing loose (single fixing) rear wheel nut finger tight. extremely dangerous (5.2.1 (a) (ii)) DANGEROUS

Motorcycle structure is modified but structural rigidity is not significantly reduced (6.1.1 (d) (i))

Suspension attachment bracket modified but not seriously weakened rear swing arm (5.3.3 (c) (i))

Exhaust slightly deteriorated silencer bracket starting to crack (7.1.1a)

Nearside Rear footrest deteriorated

fork dust seals very deteriorated.

front fairing bracket slightly loose on frame.

one tail bulb not working

l/h passenger footrest bent and pivot worn.

Rear Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Front Tyre worn close to the legal limit (4.1.3(ii))

Offside Front Brake pad(s) close to minimum limit (3.2A1f(ii))

l/h passenger footrest bent and pivot worn.

Drive chain worn but not considered excessive (6.2.1e)

Horn not working (1.7.3a)

Rear suspension bush has slight free play (2.4.A2a(i))

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Handlebar mounting clamp bolt loose (2.1.1a)

Rear suspension bush has slight free play (2.4.A2a(i))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))