2002 Yamaha DT125

Chain guard missing ()

Clutch lever shortened (6.2.7 (b))

Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

Front Wheel damaged but not to excess (5.2.2 (c) (i))

Nearside Front Clutch lever shortened (6.2.7 (b))

Offside Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Rear Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii)) DANGEROUS

Front Wheel damaged but not to excess (5.2.2 (c) (i))

Nearside Front Clutch lever shortened (6.2.7 (b))

Offside Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

Clutch lever shortened. (6.2.1g)

Drive chain sprocket slightly worn (6.2.1e)

Drive chain worn but not considered excessive (6.2.1e)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Brake lever is short but brake can still be readily applied (3.1.3c)

Front Wheel spoke slightly loose. (4.2.1b)

Rear Wheel has a slightly distorted bead rim. (4.2.2)

Drive chain excessively loose (6.2.1d)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Nearside Rear Direction indicator missing (1.5.1a)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Clutch lever shortened. (6.2.1g)

Drive chain sprocket slightly worn (6.2.1e)

Drive chain worn but not considered excessive (6.2.1e)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Brake lever is short but brake can still be readily applied (3.1.3c)

Front Wheel spoke slightly loose. (4.2.1b)

Rear Wheel has a slightly distorted bead rim. (4.2.2)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Rear suspension bush has slight free play (2.4.A2a(i))

Chain guard missing

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Headlamp aim too high (1.6)

Offside Rear Direction indicator not working (1.5.1c)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Wheel spoke excessively loose (4.2.1b)

Registration plate deteriorated (6.3.1d)

Registration plate insecure (6.3.1b)

Front Wheel has a slightly eccentric bead rim. (4.2.2)

Rear Wheel spoke slightly loose. (4.2.1b)

Drive chain excessively tight (6.2.1d)

Front Wheel has an excessively eccentric bead rim. (4.2.2)

Front Wheel spoke excessively loose (4.2.1b)

Locking device(s) not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Wheel spoke excessively loose (4.2.1b)

Front Wheel has an excessively eccentric bead rim. (4.2.2)

Nearside Chain guard missing (6.2.1c)

Rear Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Rear Rear reflector on motorcycle missing (1.4.1)

Front Front wheel bearings have excessive free play (2.3.5b) DANGEROUS

Front Wheel spoke excessively loose (4.2.1b) DANGEROUS