2005 Audi A4

Front Service brake excessively fluctuating both sides (1.2.1 (e))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Service brake excessively binding (1.2.1 (f))

Nearside Rear Wheel bearing has excessive play (5.1.3 (a) (i))

Offside Side repeater not working (4.4.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Rear Brake hose leaking on a hydraulic braking system (1.1.12 (c) (ii)) DANGEROUS

Offside Rear Brake hose leaking on a hydraulic braking system (1.1.12 (c) (ii)) DANGEROUS

Nearside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement rear (5.3.4 (a) (i))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Registration plate lamp insecure (4.7.1 (c) (i))

Driver's view Items removed from driver's view prior to test mirror hanger in drivers view area (3.1 (a) (ii))

Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Tyre worn close to legal limit/worn on edge offside front + offside rear wearing on edges (5.2.3 (e))

mirror hangers more than 40mm in drivers view area (removed)

plastic covers under vehicle front to rear obscuring view

slight damage to o/s/f outer tyre wall

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement front bush (5.3.4 (a) (i))

Offside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Offside Rear Valve stem slightly damaged (5.2.3 (j))

Tyre slightly damaged/cracking or perishing all 4 tyres cracking / getting low on tread (5.2.3 (d) (ii))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Boot lid cannot be secured in the closed position (6.2.1 (e))

Electronic stability control warning lamp indicates a fault (7.12 (e))

Front Windscreen washer not working (3.5 (a))

Nearside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement front bush (5.3.4 (a) (i))

Offside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Offside Rear Valve stem slightly damaged (5.2.3 (j))

Tyre slightly damaged/cracking or perishing all 4 tyres cracking / getting low on tread (5.2.3 (d) (ii))

Nearside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Valve stem slightly damaged (4.1.D.1e)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Rear Valve stem slightly damaged (4.1.D.1e)

Offside Rear Anti-roll bar synthetic mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement shock absorber bush (2.4.G.2)

Nearside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement shock absorber bush (2.4.G.2)

Offside Rear Anti-roll bar synthetic mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Upper Suspension arm rubber bush deteriorated but not resulting in excessive movement front inner (2.4.G.2)

Offside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Upper Suspension arm rubber bush deteriorated but not resulting in excessive movement rear inner (2.4.G.2)

child seat fitted restricting full check of adult seat belt

offside rear tyre valve stem crack/perished

Fuel system component leaking underside (7.2.3)

Nearside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Upper Suspension arm rubber bush deteriorated but not resulting in excessive movement front inner (2.4.G.2)

Offside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Upper Suspension arm rubber bush deteriorated but not resulting in excessive movement rear inner (2.4.G.2)

child seat fitted restricting full check of adult seat belt

offside rear tyre valve stem crack/perished

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear anti roll bar locating collars cracked

Nearside Rear Brake cable insecure (3.5.1d)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear anti roll bar locating collars cracked

Nearside Inner Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Brake hose slightly deteriorated (3.6.B.4d)

Offside Inner Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Brake hose slightly deteriorated (3.6.B.4d)

Rear anti-roll bar collars cracked

Slight perishing to both rear flexi brake hoses

Offside Rear Registration plate lamp not working (1.1.C.1d)

Nearside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Front brake disc excessively pitted (3.5.1h)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)