2008 Ford Ka

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner cill next to axle mounting to chassis (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner cill next to axle mounting to chassis (5.3.6 (a) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Items removed from driver's view prior to test ()

Oil leak, but not excessive engine (8.4.1 (a) (i))

Central Front Items removed from driver's view prior to test ()

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Axle swivel pins and bushes swivel pin and/or bush excessively worn (5.1.2 (b) (i))

Offside Front Headlamp aim not tested (4.1.2 (b))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front Tyre tread depth below requirements of 1.6mm inner edge (5.2.3 (e)) DANGEROUS

Offside Front Tyre has ply or cords exposed inner edge (5.2.3 (d) (ii)) DANGEROUS

Central Front Items removed from driver's view prior to test ()

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Rear Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Front Direction indicator incorrect colour WING (4.4.3 (a))

Nearside Front Suspension arm ball joint dust cover missing (5.3.4 (b) (ii))

Nearside Rear Position lamp not working (4.2.1 (a))

Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Tyre has ply or cords damaged BULGE ON INNER (5.2.3 (d) (ii)) DANGEROUS

Offside Front Tyre has ply or cords damaged (5.2.3 (d) (ii)) DANGEROUS

Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Rear Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Stop lamp not working (1.2.1b)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside front brake excessively fluctuating (3.7.B.3)

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front brake disc worn, pitted or scored, but not seriously weakened both worn and corroded (3.5.1i)

Nearside Front Inner Road wheel bead rim badly distorted (4.2.A.1a)

Nearside Front Inner Tyre has a bulge, caused by separation or partial failure of its structure side wall (4.1.D.1b)

Nearside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Front brake disc worn, pitted or scored, but not seriously weakened both worn and corroded (3.5.1i)

Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)

Offside Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)