2012 Mercedes-benz Sprinter

Central Body not fully secure (6.2.2 (a) (i))

Front Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))

Front Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Shock absorbers has slight external damage to the casing (5.3.2 (b))

Rear Brake pipe corroded, covered in grease or other material both side (1.1.11 (c))

Central Body not fully secure (6.2.2 (a) (i))

Front Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))

Front Oil leak, but not excessive (8.4.1 (a) (i))

Front Position lamp not working both side (4.2.1 (a) (ii))

Nearside Front Shock absorbers has slight external damage to the casing (5.3.2 (b))

Rear Brake pipe corroded, covered in grease or other material both side (1.1.11 (c))

Front Bumper mountings corroded but not likely to become detached both side (6.1.4 (a) (i))

Nearside Front Shock absorbers has slight external damage to the casing (5.3.2 (b))

Offside Front Driver's door pillar deteriorated but the door can still be readily opened and closed (6.2.3 (c) (i))

Offside side body dented

Rear Brake pipe corroded, covered in grease or other material both side (1.1.11 (c))

Rear Shock absorbers has a reduced damping effect both side (5.3.2 (d))

Nearside Front Brakes imbalanced across an axle (1.2.1 (b) (i))

Nearside Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Suspension component mounting prescribed area fractured significantly reducing structural strength OUTER SILL DAMAGED (5.3.6 (a) (i))

Brake pedal wearing smooth (1.1.2 (c))

Front Windscreen wiper blade defective (3.4 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material CORRODED (1.1.11 (c))

Brake pedal wearing smooth (1.1.2 (c))

Nearside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Nearside Side repeater lens defective such that the emitted light is adversely affected (4.4.1 (b) (ii))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Offside Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Offside Side repeater incorrect colour (4.4.3 (a))

Nearside Rear Leaf spring shackle bracket insecure to the extent that relative movement is visible (5.3.1 (a) (ii)) DANGEROUS

Brake pedal wearing smooth (1.1.2 (c))

Front Brake pad(s) wearing thin O/S,N/S (1.1.13 (a) (ii))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Front Brake pad(s) wearing thin O/S,N/S (1.1.13 (a) (ii))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front Headlamp aim too low both sides (4.1.2 (a))

Nearside Rear Direction indicator incorrect colour (4.4.3 (a))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Rear Rear position lamp(s) not working (1.1.A.3b)

Offside Registration plate lamp not working (1.1.C.1d)