MOT Status
ExpiredMileage
154,560 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Tyre worn close to legal limit/worn on edge offside nearside (5.2.3 (e))
Nearside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Offside Front Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
service brake efficiency only just met.it would appear that the braking system requires adjustment or repair.
Central Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Nearside Rear Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Position lamp not working (4.2.1 (a) (ii))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Offside Front Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
service brake efficiency only just met.it would appear that the braking system requires adjustment or repair.
Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Both sills and arches been repaired, covered in materials (6.2.2 (d) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength CHASSIS (5.3.6 (a) (i))
Nearside Service brake lagging in operation (1.2.1 (d))
Offside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Coil spring corroded (5.3.1 (b) (i))
Offside Front Coil spring corroded (5.3.1 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive CHASSIS (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Power steering component has slight seepage from a component rack (2.1.5 (a))
nearside rear under sill and inner wheel arch corroded
nearside under sill corroded just outside seatbelt prescibed area
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Coil spring corroded (5.3.1 (b) (i))
Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced rear chassis inbetween leaf spring (6.1.1 (c) (i))
Offside Front Coil spring corroded (5.3.1 (b) (i))
Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced chassis between leaf spring (6.1.1 (c) (i))
Offside Track rod end ball joint has slight play (2.1.3 (b) (i))
Power steering pipe/hose has slight seepage steering rack (2.1.5 (a))
nearside rear under sill corroded
Front Registration plate inscription illegible (0.1 (b))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember (5.3.6 (a) (i))
Registration plate lamp inoperative in the case of a single lamp or all lamps both (4.7.1 (b) (ii))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Coil spring corroded (5.3.1 (b) (i))
Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced rear chassis inbetween leaf spring (6.1.1 (c) (i))
Offside Front Coil spring corroded (5.3.1 (b) (i))
Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced chassis between leaf spring (6.1.1 (c) (i))
Offside Track rod end ball joint has slight play (2.1.3 (b) (i))
Power steering pipe/hose has slight seepage steering rack (2.1.5 (a))
nearside rear under sill corroded
Both rear shocker casing slightly corroded
Brake pipe corroded, covered in grease or other material All under bonnet (1.1.11 (c))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive Chassis (1.1.21 (e) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive Shocker mounting (5.3.6 (a) (i))
Offside front inner wing corroded but not within a prescribed area
Suspension arm pin or bush worn but not resulting in excessive movement Both sides front (5.3.4 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive Both sides rear spring, rear mountings (5.3.6 (a) (i))
Both rear shocker casing slightly corroded
Brake pipe corroded, covered in grease or other material All under bonnet (1.1.11 (c))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive Chassis (1.1.21 (e) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive Shocker mounting (5.3.6 (a) (i))
Offside front inner wing corroded but not within a prescribed area
Suspension arm pin or bush worn but not resulting in excessive movement Both sides front (5.3.4 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive Both sides rear spring, rear mountings (5.3.6 (a) (i))
Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive front mounting (2.4.A.3)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Outer Brake pad(s) wearing thin (3.5.1g)
Offside Front front brake fluctuating, but not excessively (3.7.B.3)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive rear mounting (2.4.A.3)
offside front inner wing corroded but not within a prescribed area
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive front mounting (2.4.A.3)
Offside Front Body has a sharp edge caused by corrosion (6.1.C.1)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Outer Brake pad(s) wearing thin (3.5.1g)
Offside Front front brake fluctuating, but not excessively (3.7.B.3)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive rear mounting (2.4.A.3)
Registration plate lamp not working both rear (1.1.C.1d)
offside front inner wing corroded but not within a prescribed area
Front Brake pad(s) wearing thin (3.5.1g)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive top shocker mounting (chassis) (2.4.A.3)
Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive top shocker mounting (chassis) (2.4.A.3)
Brake pedal anti-slip provision incomplete (3.3.A.1b)
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Power steering pipe(s) or hose(s) excessively corroded on to rack (2.3.2)
Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)
rear brake application uneven (3.7.B.2)
Front Brake pad(s) wearing thin (3.5.1g)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive top shocker mounting (chassis) (2.4.A.3)
Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive top shocker mounting (chassis) (2.4.A.3)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Front position lamp(s) has less than 50% of the light sources illuminating (1.1.A.3b)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front wheel bearing rough when rotated (2.5.A.2)
Nearside Rear reflector excessively damaged so that its function is impaired (1.5.1c)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Registration plate lamp not working (1.1.C.1d)
Nearside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Bonnet retaining device ineffective (8.4.2)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Parking brake: efficiency below requirements (3.7.B.7)
Windscreen washer provides insufficient washer liquid (8.2.3)
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Headlamp not working on dipped beam (1.7.5a)
Offside Stop lamp not working (1.2.1b)
Offside front brake juddering slightly (3.7.A.2b)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Nearside Front Headlamp not working on dipped beam (1.7.5a)
Nearside Front Seat belt has a cut which has significantly weakened the webbing (5.2.2a)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Rear Stop lamp not working (1.2.1b)
Parking brake: efficiency below requirements (3.7.B.7)
Service brake: efficiency below requirements (3.7.B.7)
Service brake: efficiency below requirements (3.7.B.7)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Front brake disc slightly pitted (3.5.1h)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
How Reliable is the Ford Transit?
Based on 16,371,688 MOT tests across 1,454,648 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
AV51 JXY is a 2001 Ford Transit in White with a 2,402cc diesel engine. This vehicle has been through 29 MOT tests with a personal pass rate of 55.2%.
Across all 2001 Ford Transit models, the average MOT pass rate is 65.8% with a typical mileage of 118,501 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Transit fails its MOT is registration plate lamp not working, accounting for 551,926 recorded failures. If you're considering buying AV51 JXY, it's worth having these areas checked by a mechanic before committing.
The Ford Transit typically stays on UK roads for around 37 years. At 25 years old, this Ford Transit is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of AV51 JXY?
You can check the full history of AV51 JXY by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was AV51 JXY registered?
AV51 JXY is a 2001 Ford Transit, first registered on 17 October 2001.
Is AV51 JXY safe to buy?
The MOT history for AV51 JXY shows 29 tests with a 55.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does AV51 JXY have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on AV51 JXY. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.