MOT Status
ExpiredMileage
113,789 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
valve stems slightly misalighned and marked by wheel trims
Nearside Front Suspension component mounting prescribed area is excessively corroded floor (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Offside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Front Suspension component mounting prescribed area is excessively corroded floor (2.4.A.3)
Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
valve stems slightly misalighned and marked by wheel trims
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Rear Brake pipe slightly corroded (3.6.B.2c)
exhaust corroding
general underbody corrosion
n/s rear back plate corroded
n/s rear tyre perishing
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Front Brakes imbalanced across an axle (3.7.B.5b)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front front brake binding (3.7.B.1)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front front brake binding (3.7.B.1)
Offside Rear Seat belt anchorage prescribed area is excessively corroded outer sill (5.2.6)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Headlamp aim too low (1.8)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Headlamp aim too low (1.8)
Rear Brake pipe slightly corroded (3.6.B.2c)
exhaust corroding
general underbody corrosion
n/s rear back plate corroded
n/s rear tyre perishing
Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Parking brake: efficiency below requirements (3.7.B.7)
Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)
Nearside Front front brake binding (3.7.B.1)
Nearside Rear rear brake binding (3.7.B.1)
Nearside Rear rear parking brake recording little or no effort (3.7.B.6a)
Offside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
EML LIGHT ON.
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
O/S/R & N/S/R WHEELARCHES BECOMING CORRODED.
Nearside front tyre worn on edges.
Brakes imbalanced across an axle (3.7.B.5b)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Nearside Front Road wheel bead rim badly distorted (4.2.A.1a)
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside front tyre worn on edges.
As per failure.
Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
brake disc in such a condition that it is seriously weakened (3.5.1i)
Nearside Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Slight damage to front windscreen.
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)
Offside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)
Offside Rear position lamp(s) not working (1.1.A.3b)
Offside Stop lamp not working (1.2.1b)
Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Child seat fitted not allowing full inspection of adult belt
advise that the o/s/f lower arm rubber bush is deteriorated
advise that there is a temporary repair on the o/s wiper arm
Nearside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Rear brake caliper has restricted free movement (3.5.1k)
Parking brake: efficiency below requirements (3.7.B.7)
Child seat fitted not allowing full inspection of adult belt
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
advise that the handbrake travel is high
advise that the o/s/f lower arm rubber bush is deteriorated
advise that there is a temporary repair on the o/s wiper arm
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front brake disc slightly pitted (3.5.1h)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front brake disc slightly pitted (3.5.1h)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front Windscreen wiper blade deteriorated (8.2.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Centre Rear Seat belt damaged sufficient to obstruct correct operation of the belt (5.2.2a)
o/s/f tyre below 1.6mm on inside and outside edges 2.0mm in center tread
How Reliable is the Mazda 323?
Based on 823,541 MOT tests across 88,407 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
AV52 CVF is a 2003 Mazda 323 in Blue with a 1,598cc petrol engine. This vehicle has been through 23 MOT tests with a personal pass rate of 52.2%.
Across all 2003 Mazda 323 models, the average MOT pass rate is 72.1% with a typical mileage of 57,526 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 323 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 53,662 recorded failures. If you're considering buying AV52 CVF, it's worth having these areas checked by a mechanic before committing.
The Mazda 323 typically stays on UK roads for around 38 years. At 23 years old, this Mazda 323 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of AV52 CVF?
You can check the full history of AV52 CVF by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was AV52 CVF registered?
AV52 CVF is a 2003 Mazda 323, first registered on 3 January 2003.
Is AV52 CVF safe to buy?
The MOT history for AV52 CVF shows 23 tests with a 52.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does AV52 CVF have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on AV52 CVF. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.