2004 Toyota Hiace

Front Brake disc worn, pitted or scored, but not seriously weakened Front discs corroded (1.1.14 (a) (ii))

Front Sub-frame corroded but not seriously weakened Subframe + both lower arms corroded (5.3.3 (b) (i))

Front Suspension arm ball joint dust cover severely deteriorated Both sides, top arm ball joints (5.3.4 (b) (i))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Suspension arm corroded but not seriously weakened Arms corroded (5.3.3 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced N/S + O/S Sill (6.1.1 (c) (i))

Front Coil spring corroded (5.3.1 (b) (i))

Front Suspension component corroded but not seriously weakened general (5.3.3 (b) (i))

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear Lower Integral body structure is corroded but structural rigidity is not significantly reduced panel both o/s & n/s holed but not within a prescribed area (6.1.1 (c) (i))

Rear Suspension component corroded but not seriously weakened general (5.3.3 (b) (i))

general corrosion to underside of vehicle

Brake lever has insufficient reserve travel (1.1.2 (a))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Front Coil spring corroded (5.3.1 (b) (i))

Front Suspension component corroded but not seriously weakened general (5.3.3 (b) (i))

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear Lower Integral body structure is corroded but structural rigidity is not significantly reduced panel both o/s & n/s holed but not within a prescribed area (6.1.1 (c) (i))

Rear Suspension component corroded but not seriously weakened general (5.3.3 (b) (i))

general corrosion to underside of vehicle

Nearside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Horn not working (7.7 (a))

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill (7.1.1 (a) (i))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Nearside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch inner (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength By arm mounting (5.3.6 (a) (i))

Nearside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength By shock absorber (5.3.6 (a) (i))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill (7.1.1 (a) (i))

Offside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength By arm mounting (5.3.6 (a) (i))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill (7.1.1 (a) (i))

Offside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength By shock absorber (5.3.6 (a) (i))

Items removed from driver's view prior to test

Nearside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Rear Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Rear underbody corrosion widespread, but not considered excessive.

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Nearside Rear Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength coil spring mounting (5.3.6 (a) (i))

Nearside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock absorber (5.3.6 (a) (i))

Offside Rear Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength coil spring mounting (5.3.6 (a) (i))

Offside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Rear Seat belt not functioning as intended all rear seat belts (7.1.2 (c))

Nearside Front jacking point corroded

Offside Rear outrigger corroded and holed

general heavy corrosion at rear

Offside Front Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Offside Headlamp aim too low (4.1.2 (a))

Nearside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Nearside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Nearside Front Suspension component attachment bracket/mounting corroded and seriously weakened (5.3.3 (b) (i))

Nearside Front Tyre has a bulge, caused by separation or partial failure of its structure (5.2.3 (d) (i))

Offside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill (5.3.6 (a) (i))

Rear Registration plate inscription illegible (0.1 (b))

Central Items removed from driver's view prior to test

Nearside Front Upper Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Upper Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Bridgestone tyre manufactured 2004

Items removed from driver's view prior to test

Nearside Rear Tyre worn close to the legal limit 3.mm (4.1.E.1)

Offside Front Tyre has as a cut in tread less than 25mm long, deep enough to reach the ply or cords

Offside Front Upper Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Items removed from driver's view prior to test

Offside Front Upper Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Upper Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Lower Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Offside Front Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Offside Front Upper Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Vehicle's internal headlight adjuster altered to recheck lights

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Vehicle's internal headlight adjuster altered to recheck lights

Nearside Headlamp aim too high and too far to the left. (1.8)

Offside Headlamp aim too low and too far to the right. (1.8)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Vehicle's internal headlight adjuster altered to recheck lights

Parking brake lever has little reserve travel (3.1.6b)

Nearside Front Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Rear number plate slightly deteriorated