MOT Status
ExpiredMileage
203,805 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS
Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Items removed from driver's view prior to test ()
Items removed from driver's view prior to test ()
Nearside Front position lamp(s) not working (1.1.A.3b)
Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Headlamp aim too low (1.8)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Headlamp aim too low (1.8)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)
Nsf tyre cutting out on inner edge
Items removed from driver's view prior to test
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front coil spring fractured (2.4.C.1a)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Headlamp not working on dipped beam (1.7.5a)
Items removed from driver's view prior to test
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Mazda 3?
Based on 2,040,939 MOT tests across 164,053 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
AV56 CNC is a 2006 Mazda 3 in Grey with a 1,598cc petrol engine. This vehicle has been through 21 MOT tests with a personal pass rate of 61.9%.
Across all 2006 Mazda 3 models, the average MOT pass rate is 74.6% with a typical mileage of 70,278 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 3 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 40,716 recorded failures. If you're considering buying AV56 CNC, it's worth having these areas checked by a mechanic before committing.
The Mazda 3 typically stays on UK roads for around 22 years. At 20 years old, this Mazda 3 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of AV56 CNC?
You can check the full history of AV56 CNC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was AV56 CNC registered?
AV56 CNC is a 2006 Mazda 3, first registered on 26 September 2006.
Is AV56 CNC safe to buy?
The MOT history for AV56 CNC shows 21 tests with a 61.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does AV56 CNC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on AV56 CNC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.