2006 Mazda 3

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))

underbody corrosion

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Tyre worn close to legal limit/worn on edge both sides (5.2.3 (e))

back box corroded

nsr registration lamp not working

rear axle corroded

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Exhaust has a minor leak of exhaust gases front flexi (6.1.2 (a))

Front Exhaust mounting defective pipe (6.1.2 (a))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive body (5.3.6 (a) (i))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Rear Tyre slightly damaged/cracking or perishing offside and nearside (5.2.3 (d) (ii))

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Exhaust has a minor leak of exhaust gases front flexi (6.1.2 (a))

Front Exhaust mounting defective pipe (6.1.2 (a))

Front Suspension arm pin or bush worn but not resulting in excessive movement offside ans nearside (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive body (5.3.6 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Rear Tyre slightly damaged/cracking or perishing offside and nearside (5.2.3 (d) (ii))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Front Nail in tyre ()

Nearside Rear Tyre has a cut but not deep enough to reach the ply or cords cut in sidewall (5.2.3 (d) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Exhaust mounting defective front and rear mountings deteriorated (6.1.2 (a))

O/S inner CV gator damaged but preventing ingress of dirt

Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Rear Tyre worn close to legal limit/worn on edge 2mm (5.2.3 (e))

Suspension arm pin or bush worn but not resulting in excessive movement both front arm rear bushed deteriorated (5.3.4 (a) (i))

Tyre slightly damaged/cracking or perishing Both front cracking and perished (5.2.3 (d) (ii))

Both front tyres wearing on inner edges.

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)