2008 Honda XL 125 V-8

Handlebar deformed but serviceable (2.2.1 (c) (i))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake excessively binding (1.2.1 (f))

Front Shock absorber has a serious fluid leak (5.3.2 (b))

Rear Brake excessively binding (1.2.1 (f))

Rear Registration plate lamp does not illuminate simultaneously with the position lamp(s) (4.7.2 (a))

Brake lever so insecure that the brake cannot be readily applied (1.1.2 (e) (ii)) DANGEROUS

Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) DANGEROUS

Front Brake fluid reservoir fluid not visible (1.1.10 (d) (iii)) DANGEROUS

Rear Stop lamp remains on when the brakes are released (4.3.2 (a) (iii)) DANGEROUS

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Handlebar deformed but serviceable (2.2.1 (c) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Footrest missing (6.2.12 (a))

Rear Brake pedal is so short that the brake cannot be readily applied broken (1.1.2 (d))

Rear Registration plate does not conform to the specified requirements (0.1 (d))

Front Stop lamp remains on when the brakes are released (4.3.2 (a) (iii)) DANGEROUS

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Brake binding but not excessively (1.2.1 (f))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Floor brake test indicates a binding brake (3.3.C2c)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Drive chain excessively loose (6.2.1d)

Rear Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Front Brake disc(s) is slightly distorted (3.2.A1m)

Drive chain worn to excess (6.2.1e)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Drive chain sprocket worn to excess (6.2.1e)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Floor brake test indicates a binding brake (3.3.C2c)

Front Floor brake test indicates a binding brake (3.3.C2c)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Brake pad(s) close to minimum limit (3.2.A1f(i))