2008 Fiat Ducato

Brake pipe corroded, covered in grease or other material front to rear ( near joiners ) (1.1.11 (c))

Front Headlamp lens slightly defective n/s & o/s front (4.1.1 (b) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced N/S & O/S Sills (6.1.1 (c) (i))

N/S & O/S Sill Rustee But Ok

Offside Front Suspension rod ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Top spring surporting plate rustee

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Brake pipe corroded, covered in grease or other material front to rear ( near joiners ) (1.1.11 (c))

Front Headlamp lens slightly defective n/s & o/s front (4.1.1 (b) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced N/S & O/S Sills (6.1.1 (c) (i))

N/S & O/S Sill Rustee But Ok

Offside Front Suspension rod ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Top spring surporting plate rustee

Headlamp has a product on the light source so that the light output is severely reduced Both plastic head lamp lenses cloudy (4.1.4 (b))

Nearside Front Service brake excessively binding (1.2.1 (f))

Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Nearside Parking brake inoperative on one side (1.4.1 (a))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Nearside Side repeater lens defective which has no effect on emitted light (4.4.1 (b) (i))

Offside Side repeater lens defective which has no effect on emitted light (4.4.1 (b) (i))

Headlamp aim unable to be tested n/s lens faulty and o/s lamp not working. (4.1.2 (b))

Nearside Front Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill/bottom arch. (6.1.1 (c) (i))

Nearside Headlamp lens seriously defective Lens deteriorated. (4.1.1 (b) (ii))

Offside Front Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill/ bottom arch. (6.1.1 (c) (i))

Offside Front Lower Integral body structure inadequately repaired such that structural rigidity is significantly reduced Body filler in sill and lip missing. (6.1.1 (d) (i))

Offside Headlamp lens seriously defective Moisture on inside of lens. (4.1.1 (b) (ii))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Rear Inner Suspension component mounting prescribed area is inadequately repaired Body filler in corroded sill. (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Lower Integral body structure is repaired but structural rigidity is not significantly reduced Possible body filler in sill. (6.1.1 (d) (i))

Nearside Side repeater lens defective which has no effect on emitted light (4.4.1 (b) (i))

Offside Side repeater lens defective which has no effect on emitted light (4.4.1 (b) (i))

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced Sill behind wheel arch starting to corrode (6.1.1 (c) (i))

Offside Integral body structure is corroded but structural rigidity is not significantly reduced Front and rear of sills starting to corrode (6.1.1 (c) (i))

Nearside Rear Brake cable damaged Outer covering damaged and outer cable rusted (1.1.15 (a))

Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced Sill behind wheel arch starting to corrode (6.1.1 (c) (i))

Offside Integral body structure is corroded but structural rigidity is not significantly reduced Front and rear of sills starting to corrode (6.1.1 (c) (i))

Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))

front lower suspension arm rear inner bushes split

rear tyres starting to perish

rear tyres starting to perish

Offside Registration plate lamp not working 239 bulb (1.1.C.1d)

Exhaust silencer heavily corroded but not blowing

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Power steering pipe(s) or hose(s) leaking from a seal power steering pump hose (2.3.3b)

Exhaust silencer heavily corroded but not blowing

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

silencer outer skin corroded

silencer deteriorated

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

silencer deteriorated

Exhaust system not adequately supported (7.1.1)

Nearside Rear Direction indicator incorrect colour (1.4.A.2f)

Nearside front brake binding (3.7.B.1)

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Obligatory mirror seriously damaged, affecting the rear view (8.1.2a)

Offside front brake binding (3.7.B.1)

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

silencer deteriorated

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Registration plate lamp not working (1.1.C.1d)

Rear Exhaust system not adequately supported (7.1.1)

Oil leak