2010 Honda CBF125

Exhaust noisy (8.1.1 (a))

Exhaust noisy (8.1.1 (a))

Front Wheel alignment slightly misaligned (2.4 (a))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Brake fluid contaminated (1.8 (a))

Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e))

Front Handlebar excessively deformed (2.2.1 (c) (i))

Front Headlamp aim too high (4.1.2 (a))

Front Steering headbearing has excessive wear or free play dangerous (2.2.2 (f) (i))

Headlamp insecure (4.1.1 (c))

Handlebar grip insecure to handlebar both grips insecure (2.2.1 (d) (ii)) DANGEROUS

Exhaust noisy (8.1.1 (a))

Front Wheel alignment slightly misaligned (2.4 (a))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Front Wheel alignment incorrect which adversely affects the steering forks bent/misaligned (2.4 (a))

Headlamp aim unable to be tested Headlamp bulb incorrectly fitted. (4.1.2 (b))

Headlamp insecure (4.1.1 (c))

Nearside Front Shock absorber has a serious fluid leak Fork Seal leaking. (5.3.2 (b))

Nearside Rear Direction indicator likely to become detached (4.4.1 (c) (ii))

Rear Brake pedal is bent and the brake cannot be readily applied Fouling exhaust (1.1.2 (d))

Rear Suspension arm pin or bush excessively worn Swinging arm bushes excessively worn, swinging arm twists under load. (5.3.4 (a) (i))

Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))

Front Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Handlebar deformed to the extent that steering is affected (2.2.1 (c) (ii)) DANGEROUS

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Offside Rear Shock Absorber Fouling exhaust end can.

Exhaust noisy (8.1.1 (a))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Stop lamp not working rear brake switch adjusted (4.3.1 (a) (ii))

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Drive chain slightly loose (6.2.1d)

Stop lamp remains on when the brake is released (1.3.1e)

Drive chain slightly loose (6.2.1d)