1980 Suzuki GS250

Offside Exhaust noisy (8.1.1 (a))

Exhaust noisy (8.1.1 (a))

Front Tyre not fitted in accordance with side wall instructions Direction wrong (5.2.3 (i))

Front Wheel fixing missing (multiple fixings) Locking device (5.2.1 (a) (i))

Handlebar retaining device missing (2.2.1 (b) (i))

Nearside Position lamp switch insecure (4.2.2 (b))

Offside Footrest insecure (6.2.12 (a))

Rear Brake pedal has insufficient reserve travel (1.1.2 (a))

Registration plate does not conform to the specified requirements (0.1 (d))

Wheel alignment incorrect which adversely affects the handling (2.4 (a))

Exhaust noisy (8.1.1 (a))

Headlight beam switch main beam is high and high beam is main

Lower Engine mounting/bracket damaged but not to excess (6.1.8 (a) (i))

Rear Brake pedal has slight side movement indicating a worn pedal bearing or pivot (1.1.1 (b))

Exhaust noisy (8.1.1 (a))

Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i))

Rear Stop lamp not working no switch fitted to rear brake (4.3.1 (a) (ii))

Rear reflector missing (4.8.2 (a) (ii))

Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b))

Front Engine mounting/bracket missing (6.1.8 (a) (ii)) DANGEROUS

Drive chain slightly tight (6.1.7 (k) (i))

Exhaust noisy (8.1.1 (a))

Exhaust noisy (7.1.2)

Motorcycle structure has been slightly modified (6.1.1b)

Rear No rear suspension was fitted at the time of the test.

front suspension travel is less than a standard set up travel would be probably due to having too much fork oil in the fork legs.

no direction indicators were fitted at the time of the test.

Exhaust noisy (7.1.2)

Headlamp aim too high headlamp body was 90 degrees out,this has been rectified. (1.6)

Motorcycle structure has been slightly modified (6.1.1b)

Rear No rear suspension was fitted at the time of the test.

Registration plate does not have black characters on a yellow background A standard sized yellow and black number plate was fitted during the test as the one presented was black and silver classic style. (6.3.2a)

front suspension travel is less than a standard set up travel would be probably due to having too much fork oil in the fork legs.

no direction indicators were fitted at the time of the test.