MOT Status
ExpiredMileage
99,001 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Nearside front brake application uneven (3.7.B.2)
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside front brake application uneven (3.7.B.2)
Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
slight corrosion in the nearside outer sill
slight corrosion in the offside outer sill
Nearside Outer Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Outer Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)
Front Power steering component(s) leaking (2.3.3b) DANGEROUS
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Outer Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Outer Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear coil spring incomplete (2.4.C.1a)
Offside Headlamp not in good working order adversely affecting beam image (1.2.4a)
Offside Rear coil spring fractured (2.4.C.1a)
Offside Registration plate lamp not working (1.1.5c)
Power steering component(s) leaking from a failed seal (2.3.3b)
front brake discs worn and corroded
rear number plate in poor condition
Nearside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Shock absorber has a serious fluid leak (2.7.3)
Nearside Rear coil spring incomplete (2.4.C.1a)
Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
AX02 BSU is a 2002 Ford Ka in Black with a 1,299cc petrol engine. This vehicle has been through 13 MOT tests with a personal pass rate of 61.5%.
Across all 2002 Ford Ka models, the average MOT pass rate is 65.6% with a typical mileage of 48,988 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying AX02 BSU, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 24 years old, this Ford Ka is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of AX02 BSU?
You can check the full history of AX02 BSU by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was AX02 BSU registered?
AX02 BSU is a 2002 Ford Ka, first registered on 14 June 2002.
Is AX02 BSU safe to buy?
The MOT history for AX02 BSU shows 13 tests with a 61.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does AX02 BSU have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on AX02 BSU. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.