2002 Mazda 323

Brake pipe corroded, covered in grease or other material various brake pipes covered in grease (1.1.11 (c))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Front Inner Vehicle structure is corroded but structural rigidity is not significantly reduced only just meeting mot standard (6.1.1 (c) (i))

Offside Front Integral body structure is fractured but structural rigidity is not significantly reduced inner sill (6.1.1 (a) (i))

Offside Rear Brake pad(s) wearing thin close to 1.5mm limit (1.1.13 (a) (ii))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Rear Suspension rod pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Brake pipe corroded, covered in grease or other material various brake pipes slightly corroded (1.1.11 (c))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced floor (6.1.1 (c) (i))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Rear Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Front tyres worn on inner edges

underbody corroded and becoming thin in places,especially osf floor

hole in near side rear sill but not structural

Nearside Front front brake binding (3.7.B.1)

Supplementary Restraint System warning lamp indicates a fault (5.4.2)

hole in near side rear sill but not structural

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Stop lamp not working (1.2.1b)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

front brake discs in poor condition

Both front brake discs slightly corroded on inside

Both rear tyres slightly out of shape

Front registration plate deteriorated (6.3.1d)

Nearside Headlamp aim too high (1.8)

Offside Headlamp aim too high (1.8)