2002 Mazda 323

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Offside Front Position lamp not working (4.2.1 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Both rear outer sills (6.1.1 (c) (i))

Brake disc worn, pitted or scored, but not seriously weakened Both rear discs corroded (1.1.14 (a) (ii))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Suspension component mounting prescribed area is corroded but not considered excessive Front subframe (5.3.6 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced Offside front outer and inner wheel arch (6.1.1 (c) (i))

All brake discs corroded

Both outer sills corroded at rear of car

Exhaust hanger broken but system still adequately supported

Exhaust system corroded

Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside front wheel arch corroded

Parking brake efficiency only just met requirements

Rear bumper crossmember corroded

Nearside Front Tyre tread depth below requirements of 1.6mm and tread shredding (4.1.E.1)

Nearside Stop lamp not working (1.2.1b)

All brake discs corroded

Both outer sills corroded at rear of car

Exhaust hanger broken but system still adequately supported

Exhaust system corroded

Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside front wheel arch corroded

Parking brake efficiency only just met requirements

Rear bumper crossmember corroded

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Rear Lower Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Parking brake lever has little reserve travel (3.1.6b)

exhaust system corroded

Nearside Front Upper Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Upper Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Rear Lower Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Lower Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Parking brake lever has little reserve travel (3.1.6b)

exhaust system corroded

Exhaust tail box to intermediate pipe joint very rusty

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front registration plate delaminated but not likely to be misread (6.3.1d)

Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front front brake binding (3.7.B.1)

Exhaust tail box to intermediate pipe joint very rusty

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front registration plate delaminated but not likely to be misread (6.3.1d)

Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear tyre has a strange wear pattern indicating reduced damping effect from rear shocks

Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Rear Brake pipe slightly damaged (2.2.D.2b)

Offside front tyre is showing signs of being run under inflated and cracking has started on inner wall

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

NSF tyre wearing on inner edge

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

NSF tyre wearing on inner edge

rear brake pads getting low

nearside front tyes out of shape on inner edge