2004 Fiat Scudo

Brake load sensing valve linkage defective and function impaired (1.1.17 (a))

Brake load sensing valve linkage obviously incorrectly adjusted spring insecure (1.1.17 (b))

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Lower Suspension arm pin or bush excessively worn inner (5.3.4 (a) (i))

Nearside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength INNER SILL (5.3.6 (a) (i))

Nearside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength INNER AND OUTER SILL (5.3.6 (a) (i))

Rear Brake valve leaking compensater valve (1.1.7 (d) (i))

Windscreen wiper does not clear the windscreen effectively BOTH X2 (3.4 (b) (ii))

Nearside Front Lower Sub-frame insecure and impairing directional stability 2 bolts snapted (5.3.3 (a) (ii)) DANGEROUS

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Lower engine mounting slightly worn and oily

oil leak

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Axle swivel pins and bushes swivel pin and/or bush excessively worn (5.1.2 (b) (i))

Offside Rear Inner Suspension arm attachment bracket/mounting corroded and seriously weakened sill (5.3.3 (b) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Oil leak, but not excessive (8.4.1 (a) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Front Suspension arm has slight play in a pin/bush (2.4.G.2)

Offside Front Ball joint has slight play (2.2.B.1f)

Oil leak ()

Front brake disc in such a condition that it is seriously weakened near side and off side (3.5.1i)

Windscreen washer provides insufficient washer liquid (8.2.3)

Oil leak ()

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Brake load sensing valve stiff (3.6.E.3)

Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Brake load sensing valve linkage stiff (3.6.E.3)

Exhaust has a minor leak of exhaust gases (7.1.2)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Side repeater slightly discoloured (1.4.A.2f)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Headlamp aim too high (1.8)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Headlamp aim too high (1.8)

Offside Side repeater slightly discoloured (1.4.A.2f)

Front Brake pad(s) wearing thin (3.5.1g)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Front position lamp(s) not working (1.1.A.3b)

Outer Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Inner Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b) DANGEROUS

Front Brake pad(s) wearing thin (3.5.1g)