2005 Skoda Octavia

Brake performance unable to be tested (1.2.1 (g))

Emissions unable to be completed (8.2.2.2 (e))

Headlamp aim unable to be tested (4.1.2 (b))

Nearside Front Headlamp aim too low (4.1.2 (a))

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Road wheel fixing missing (5.2.1 (a) (i))

Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Nearside Side repeater not working (4.4.1 (a) (ii))

Offside Rear Road wheel fixing missing (5.2.1 (a) (i))

Offside Rear Shock absorbers has negligible damping effect (5.3.2 (d))

Rear Sub-frame corroded and seriously weakened (5.3.3 (b) (i))

Rear Sub-frame likely to fail (5.3.3 (b) (ii)) DANGEROUS

Offside Front Obligatory mirror slightly damaged (3.3 (b) (i))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Very long brake pedal

Nearside Rear Service brake excessively binding (1.2.1 (f))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Front Tyre tread depth below requirements of 1.6mm both sides (5.2.3 (e)) DANGEROUS

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Sub-frame ball joint has slight play (5.3.4 (a) (i))

Central Exhaust silencer slightly loose clamp in poor condition (8.1.1 (b) (i))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm main bush (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm main bush (5.3.4 (a) (i))

Rear subframe corroded

Exhaust emissions exceed level of metered smoke for a turbo charged engine (8.2.2.2 (b))

Nearside Front Lower Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))

Offside Front Lower Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))

Exhaust emits excessive smoke or vapour but not likely to obscure the vision of other road users (8.2.2.2 (c))

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Exhaust emits excessive smoke or vapour but not likely to obscure the vision of other road users (8.2.2.2 (c))

Nearside Front Headlamp aim too high (4.1.2 (a))

Offside Front Headlamp aim too high (4.1.2 (a))

Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Suspension arm pin or bush worn but not resulting in excessive movement offside and nearside front lower rear (5.3.4 (a) (i))

Suspension component pin or bush slightly worn offside and nearside rear trailing arm bushes (5.3.4 (a) (i))

n/s/f rear wishbone bush becoming worn

n/s/r trailing arm bush becoming worn

o/s/f rear wishbone bush becoming worn

o/s/r trailing arm bush becoming worn

rear axle becoming corroded

Nearside Front coil spring broken (2.4.C.1a)

n/s/f rear wishbone bush becoming worn

n/s/r trailing arm bush becoming worn

o/s/f rear wishbone bush becoming worn

o/s/r trailing arm bush becoming worn

rear axle becoming corroded

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)

Nail in offside front tyre

Nearside Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)

o/s/r tyre cracked / perished in the gaps between tread

Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Front Windscreen has damage to an area in excess of a 10mm circle within zone 'A' (8.3.1a)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)