MOT Status
ExpiredMileage
89,981 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
BOTH REAR SHOCK ABSORBERS CORRODED
Nearside Headlamp aim projected beam image is obviously incorrect water inside lens (4.1.2 (c))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (7.1.1 (a) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
both rear shock absorbers corroded
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Direction indicator incorrect colour (4.4.3 (a))
Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Front Direction indicator incorrect colour (4.4.3 (a))
Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Rear Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Suspension arm corroded but not seriously weakened beam (5.3.3 (b) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Rear shock absorbers corroded
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Suspension arm corroded but not seriously weakened beam (5.3.3 (b) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Rear shock absorbers corroded
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner and outer sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner and outer sill (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner and outer sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner and outer sill (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill and chassis (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill and chassis (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Offside Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt insecure (6.1.7 (g) (ii))
Nearside Front Tyre tread depth below requirements of 1.6mm inside edge (5.2.3 (e)) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm inside edge (5.2.3 (e)) DANGEROUS
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill and chassis (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill and chassis (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
body surface corrosion
surface corrosion on all brake hoses ferrules
Central Rear Stop lamp not working high level (1.2.1b)
Nearside Brake pad(s) less than 1.5 mm thick iner pad (3.5.1g)
Nearside Front Headlamp not working on dipped beam (1.7.5a)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Rear Registration plate lamp not working (1.1.C.1d)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Front Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
noise from engine
Nearside Front Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Track rod end ball joint has excessive play (2.2.B.1f)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
both front brake discs corroded
Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)
Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Direction indicator slightly discoloured (1.4.A.2f)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
both front brake discs corroded
How Reliable is the Citroen C3?
Based on 4,435,918 MOT tests across 313,601 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
AX05 MZZ is a 2005 Citroen C3 in Blue with a 1,360cc petrol engine. This vehicle has been through 26 MOT tests with a personal pass rate of 61.5%.
Across all 2005 Citroen C3 models, the average MOT pass rate is 70.6% with a typical mileage of 57,373 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Citroen C3 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 107,792 recorded failures. If you're considering buying AX05 MZZ, it's worth having these areas checked by a mechanic before committing.
The Citroen C3 typically stays on UK roads for around 24 years. At 21 years old, this Citroen C3 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of AX05 MZZ?
You can check the full history of AX05 MZZ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was AX05 MZZ registered?
AX05 MZZ is a 2005 Citroen C3, first registered on 25 July 2005.
Is AX05 MZZ safe to buy?
The MOT history for AX05 MZZ shows 26 tests with a 61.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does AX05 MZZ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on AX05 MZZ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.