2005 Toyota Prius

Body not fully secure (6.2.2 (a) (i))

Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Front Shock absorbers has a reduced damping effect (5.3.2 (d))

Front Valve stem slightly damaged (5.2.3 (j))

Nearside Rear Seat belt buckle slightly damaged (7.1.2 (d))

Rear Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Rear Shock absorbers has a reduced damping effect (5.3.2 (d))

Rear Valve stem slightly damaged (5.2.3 (j))

Steering head bearings has slight free play (2.2.2 (g))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Body not fully secure (6.2.2 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Valve stem slightly damaged Both sides. (5.2.3 (j))

Headlamp has a product on the lens but not seriously reducing light output Both sides. (4.1.4 (b))

Nearside Front Shock absorbers has a reduced damping effect (5.3.2 (d))

Nearside Obligatory mirror slightly damaged (3.3 (b) (i))

Nearside Rear Seat belt buckle slightly damaged (7.1.2 (d))

Offside Front Lower Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Rear Valve stem slightly damaged Both sides. (5.2.3 (j))

Steering head bearings has slight free play (2.2.2 (g))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Windscreen wiper blade defective Both sides. (3.4 (b) (i))

Engine covers and Under-trays fitted obscuring some underside components

Front Headlamp has a product on the light source but not seriously reducing light output both (4.1.4 (b))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Front Suspension arm ball joint dust cover severely deteriorated both sides (5.3.4 (b) (i))

Front Tyre worn close to legal limit/worn on edge both sides (5.2.3 (e))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced all around underneath (6.1.1 (c) (i))

Engine covers and Under-trays fitted obscuring some underside components

Front Headlamp has a product on the light source but not seriously reducing light output both (4.1.4 (b))

Front Position lamp not working (4.2.1 (a) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Front Suspension arm ball joint dust cover severely deteriorated both sides (5.3.4 (b) (i))

Front Tyre worn close to legal limit/worn on edge both sides (5.2.3 (e))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced all around underneath (6.1.1 (c) (i))

Front Headlamp has a product on the light source but not seriously reducing light output both sides (4.1.4 (b))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Tyre worn close to legal limit/worn on edge both sides (5.2.3 (e))

Rear Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))

Front Headlamp has a product on the light source but not seriously reducing light output both sides (4.1.4 (b))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Tyre worn close to legal limit/worn on edge both sides (5.2.3 (e))

Nearside Front Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Rear Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))

Offside Front Wheel hub spigot mounting worn to the extent that wheel security is adversely affected (5.2.1 (b) (ii))

Front Brake pad(s) less than 1.5 mm thick both side (3.5.1g)

Front Front position lamp(s) not working both side (1.1.A.3b)

Rear Registration plate lamp not working both side (1.1.C.1d)

Child seat fitted not allowing full inspection of adult belt

Front registration plate deteriorated but not likely to be misread (6.3.1d)

OFSIDE rear back light slightly damaged

Rear Vehicle structure has slight corrosion (6.1.B.2)

Nearside Front Headlamp aim not tested (1.8.A.1c)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Child seat fitted not allowing full inspection of adult belt

Front registration plate deteriorated but not likely to be misread (6.3.1d)

OFSIDE rear back light slightly damaged

Rear Vehicle structure has slight corrosion (6.1.B.2)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Headlamp aim too high (1.8)

Offside Front position lamp(s) not working (1.1.A.3b)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)