2005 Audi A3

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

rear section of car under car complete rusty

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))

Shock absorbers has light misting of oil Both front (5.3.2 (b))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust has a major leak of exhaust gases Middle box (6.1.2 (a))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))

Shock absorbers has light misting of oil Both front (5.3.2 (b))

Exhaust has a minor leak of exhaust gases middle box (6.1.2 (a))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Front Direction indicator lens defective which has no effect on emitted light wing lens (4.4.1 (b) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Rear Road wheel fixing missing (5.2.1 (a) (i))

Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Exhaust has a minor leak of exhaust gases middle box (6.1.2 (a))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Front Direction indicator lens defective which has no effect on emitted light wing lens (4.4.1 (b) (i))

Coolant leak ()

Front Brake disc worn, pitted or scored, but not seriously weakened both sides (1.1.14 (a) (ii))

Front Suspension arm corroded but not seriously weakened both sides (5.3.3 (b) (i))

Front no plate is dirty

OBD NOT WORKING

Rear Anti-roll bar pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened both sides (1.1.14 (a) (ii))

Rear Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Rear Upper Suspension arm corroded but not seriously weakened both sides (5.3.3 (b) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Coolant leak ()

Front Brake disc worn, pitted or scored, but not seriously weakened both sides (1.1.14 (a) (ii))

Front Suspension arm corroded but not seriously weakened both sides (5.3.3 (b) (i))

Front no plate is dirty

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

OBD NOT WORKING

Rear Anti-roll bar pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened both sides (1.1.14 (a) (ii))

Rear Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Rear Upper Suspension arm corroded but not seriously weakened both sides (5.3.3 (b) (i))

engine oil low

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

near side rear tyre is starting to go out of shape

rear brake pads are starting to get low