2007 Honda Cbr 125 RW-6

Rear Tyre worn close to the legal limit (5.2.3 (e))

Rear Shock absorber has a slightly worn bush (5.3.2 (c))

Front Headlamp aim too low (4.1.2 (a))

Rear Shock absorber has a slightly worn bush (5.3.2 (c))

All direction indicators not working (4.4.1 (a) (ii))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Headlamp not working on main beam (4.1.1 (a) (ii))

Horn not working (7.7 (a))

Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))

Rear Position lamp not working (4.2.1 (a))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) DANGEROUS

Front Wheel alignment slightly misaligned (2.4 (a))

Rear Lower Suspension pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Exhaust noisy has baffle fitted. (8.1.1 (a))

Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i))

Drive chain worn to excess (6.1.7 (c) (i))

Front Brake pad(s) contaminated (1.1.13 (b))

Front Stop lamp not working (4.3.1 (a) (ii))

Horn not working missing (7.7 (a) (ii))

Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Nearside Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b))

Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Rear Upper Shock absorber has an excessively worn bush (5.3.2 (c))

Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) DANGEROUS

Exhaust noisy (8.1.1 (a))

Front Brake indicates a slightly grabbing brake (1.2.1 (c))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front Brake excessively binding (1.2.1 (f))

Front Shock absorber has a serious fluid leak fork seals (5.3.2 (b))

Front Stop lamp not working (4.3.1 (a) (ii))

Drive chain sprocket slightly loose (6.1.7 (c) (i))

Clutch lever bent (6.2.7 (b))

Horn not working (7.7 (a) (ii))

Stop lamp not working rear brake (4.3.1 (a) (ii))

Clutch lever bent (6.2.7 (b))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Tyre valve stem slightly damaged (4.1.2c)

Rear Tyre valve stem slightly damaged (4.1.2c)