MOT Status
ExpiredMileage
158,866 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Stop lamp not working (1.2.1b)
Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Nearside Front wheel bearing has slight play (2.5.A.3c)
Brake pedal creeps down under servo assistance and touches the floor (3.3.C.3)
Nearside Headlamp aim too low (1.8)
Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Nearside Front wheel bearing has slight play (2.5.A.3c)
Nearside Front Brake hose excessively deteriorated (3.6.B.4d)
Nearside Front Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Headlamp aim too low (1.8)
Offside Front Brake hose excessively deteriorated (3.6.B.4d)
Offside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Front Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b) DANGEROUS
Front Brake Pads & Disc's Slightly Worn
Nearside Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Offside Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Under-trays fitted obscuring some underside components
Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear coil spring fractured (2.4.C.1a)
Offside Rear coil spring fractured (2.4.C.1a)
Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
centre exhaust bracket broken
Nearside Headlamp aim too low (1.8)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Audi A3?
Based on 7,415,025 MOT tests across 593,922 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
AX52 CNC is a 2003 Audi A3 in Black with a 1,781cc petrol engine. This vehicle has been through 15 MOT tests with a personal pass rate of 60%.
Across all 2003 Audi A3 models, the average MOT pass rate is 71.6% with a typical mileage of 92,659 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Audi A3 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 173,142 recorded failures. If you're considering buying AX52 CNC, it's worth having these areas checked by a mechanic before committing.
The Audi A3 typically stays on UK roads for around 29 years. At 23 years old, this Audi A3 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of AX52 CNC?
You can check the full history of AX52 CNC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was AX52 CNC registered?
AX52 CNC is a 2003 Audi A3, first registered on 8 January 2003.
Is AX52 CNC safe to buy?
The MOT history for AX52 CNC shows 15 tests with a 60% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does AX52 CNC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on AX52 CNC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.