2003 Yamaha YP125

Offside Front Shock absorber has a light misting of oil Fork seal (5.3.2 (b))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear suspension operation slightly stiff & rear hugger bolt front bolt broken off

Suspension corroded but not seriously weakened R & L fork legs slightly pitted (5.3.3 (b) (i))

Front Brake lever has insufficient reserve travel (1.1.2 (a))

Nearside Headlamp aim unable to be tested (4.1.2 (b))

Nearside Rear Position lamp not working (4.2.1 (a))

Offside Headlamp aim too high (4.1.2 (a))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Exhaust slightly loose lower rear silencer bolt not fitted correctly (6.1.2 (a))

Offside Front Shock absorber has a light misting of oil Fork seal (5.3.2 (b))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear suspension operation slightly stiff & rear hugger bolt front bolt broken off

Suspension corroded but not seriously weakened R & L fork legs slightly pitted (5.3.3 (b) (i))

Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Lower Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear tyre has cracking in tread pattern

Rear Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Lower Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear tyre has cracking in tread pattern

Front Tyre worn close to the legal limit (5.2.3 (e))

Front Valve stem slightly damaged (5.2.3 (j))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Front Brake pad(s) less than 1.0 mm thick (1.1.13 (a))

Rear Brake pad(s) less than 1.0 mm thick (1.1.13 (a))

Steering headbearing in such a condition that steering control is adversely affected (2.2.2 (f) (ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Steering movement slightly 'notchy' (2.2.1a)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Steering movement excessively stiff with the weight on the lower bearing (2.2.1a)

Nearside Front Front shock absorber seal failed and leaking oil (2.3.3)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))