MOT Status
ValidMileage
233,843 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
front floorpans corroded
offside side repeater cover missing
Nearside Front Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Front Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
various body panels dented and covered in tape
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Front Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Rear fog lamp not working (4.5.1 (a) (ii))
front floorpans corroded
offside side repeater cover missing
various body panels dented and covered in tape
Body has tape over multiple panels
Brake load sensing valve stiff (1.1.17 (c) (ii))
Front side repeater lens missing but light output not affected
N/S/F Floor pan corroded
Nearside Front Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Nearside Front Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security out rigger (6.2.2 (d) (i))
O/S/F ABS Sensor fixing bolt missing
O/S/F Floor pan corroded
Offside Front Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Front Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security out rigger (6.2.2 (d) (i))
Offside Front Headlamp not working on main beam (4.1.1 (a) (ii))
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS
Body has tape over multiple panels
Brake load sensing valve stiff (1.1.17 (c) (ii))
Front side repeater lens missing but light output not affected
N/S/F Floor pan corroded
Nearside Front Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Nearside Front Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security out rigger (6.2.2 (d) (i))
O/S/F ABS Sensor fixing bolt missing
O/S/F Floor pan corroded
Offside Front Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Front Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security out rigger (6.2.2 (d) (i))
Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))
Nearside Front Body component damaged and likely to cause injury under bumper offside and nearside (6.2.1 (a) (i))
Nearside Front Body component damaged and likely to cause injury wing (6.2.1 (a) (i))
Nearside Rear Body component damaged and likely to cause injury buck (6.2.1 (a) (i))
Nearside Side repeater not working + lens missing (4.4.1 (a) (ii))
Offside Headlamp lens seriously defective (4.1.1 (b) (ii))
Offside Headlamp lens seriously defective (4.1.1 (b) (ii))
Offside Parking brake inoperative on one side (1.4.1 (a))
Offside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock absorber mounting (5.3.6 (a) (i))
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Offside Side repeater incorrect colour lens missing (4.4.3 (a))
Prop shaft joint excessively worn rear of rear (6.1.7 (c) (i))
Rear fog lamp missing (4.5.1 (a) (ii))
Service brake efficiency below requirements (1.2.2 (a) (i))
Anti-roll bar missing (5.3.3 (a) (ii)) DANGEROUS
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS
Brake load sensing valve stiff (1.1.17 (c) (ii))
Front body mounts corroded
front cab floors corroded
inter cooler insecure
Brake load sensing valve stiff (1.1.17 (c) (i))
Front Brake hose has slight corrosion to ferrule both sides (1.1.12 (f) (i))
Front Lower Suspension arm corroded but not seriously weakened both (5.3.3 (b) (i))
Front Upper Suspension arm corroded but not seriously weakened both (5.3.3 (b) (i))
Fuel Pipe/s corroded ()
Integral body structure is corroded but structural rigidity is not significantly reduced both front inner wings (6.1.1 (c) (i))
Nearside buck corroded
Rear Suspension spring mounting prescribed area is corroded but not considered excessive front of rear mounting brackets(both sides) (5.3.6 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced various places (6.1.1 (c) (i))
offside and nearside cab floor corroded
Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting 2nd body mounting (6.2.2 (d) (i))
Brake load sensing valve stiff (1.1.17 (c) (i))
Front Brake hose has slight corrosion to ferrule both sides (1.1.12 (f) (i))
Front Lower Suspension arm corroded but not seriously weakened both (5.3.3 (b) (i))
Front Upper Suspension arm corroded but not seriously weakened both (5.3.3 (b) (i))
Fuel Pipe/s corroded ()
Integral body structure is corroded but structural rigidity is not significantly reduced both front inner wings (6.1.1 (c) (i))
Nearside buck corroded
Rear Suspension spring mounting prescribed area is corroded but not considered excessive front of rear mounting brackets(both sides) (5.3.6 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced various places (6.1.1 (c) (i))
offside and nearside cab floor corroded
Body and chassis have corrosion around all body mounting points
Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))
Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Body and chassis have corrosion around all body mounting points
Fuel Pipe/s corroded ()
General corrsion around body mounting points but not excessive
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))
Rear buck corroded but secure
Brake load sensing valve stiff (1.1.17 (c) (ii))
Fuel Pipe/s corroded ()
Vehicle structure is corroded but structural rigidity is not significantly reduced chassis general (6.1.1 (c) (i))
corrosion to offside and nearside inner wings
corrosion to offside chassis near rear of diesel tank
fuel tank brackets corroded
rear buck wheel arches corroded
Fuel pipe leaking around diesel tank area (6.1.3 (b) (i))
Brake load sensing valve stiff (1.1.17 (c) (ii))
Fuel Pipe/s corroded ()
Vehicle structure is corroded but structural rigidity is not significantly reduced chassis general (6.1.1 (c) (i))
corrosion to offside and nearside inner wings
corrosion to offside chassis near rear of diesel tank
rear buck wheel arches corroded
N/s and O/S rear wheel arches/buck corroded
rear chassis is generally in rusty condition
Offside Rear Brake prescribed area is excessively corroded (1.1.21 (e) (i))
N/s and O/S rear wheel arches/buck corroded
rear chassis is generally in rusty condition
Offside Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)
fuel tank slightly damp at rear
rear axle casing oil leak
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)
Offside Stop lamp not working (1.2.1b)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
fuel tank slightly damp at rear
rear axle casing oil leak
Fuel Pipe/s corroded ()
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Propshaft universal joint worn ()
Exhaust system not adequately supported front bracket broken (7.1.1)
Nearside Front Body has a projection caused by damage (6.1.C.1)
Rear Brake hose ferrule excessively corroded (3.6.B.4e)
Fuel Pipe/s corroded ()
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Propshaft universal joint worn ()
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
fuel pipes rusty
surface corrosion on various parts of chassis but still solid
Nearside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
surface corrosion on various parts of chassis but still solid
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Front exhaust bracket corrded through
Nearside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
o/s front tyre worn on inside
Nearside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
o/s front tyre worn on inside
Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Front Brake pipe slightly corroded (3.6.B.2c)
Brake pipe excessively corroded (3.6.B.2c)
Rear Brake pipe excessively corroded (3.6.B.2c)
Front Brake pipe slightly corroded (3.6.B.2c)
Front Tyre worn close to the legal limit (4.1.E.1)
Brake pipe slightly corroded (3.6.B.2c)
Offside Front front brake binding (3.7.B.1)
Offside Leaf spring fractured (2.4.B.1a)
How Reliable is the Ford Ranger?
Based on 1,687,380 MOT tests across 189,558 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
AY03 WOA is a 2003 Ford Ranger in Blue with a 2,499cc diesel engine. This vehicle has been through 33 MOT tests with a personal pass rate of 60.6%.
Across all 2003 Ford Ranger models, the average MOT pass rate is 70.7% with a typical mileage of 94,107 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ranger fails its MOT is brake pipe excessively corroded, accounting for 41,033 recorded failures. If you're considering buying AY03 WOA, it's worth having these areas checked by a mechanic before committing.
The Ford Ranger typically stays on UK roads for around 27 years. At 23 years old, this Ford Ranger is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of AY03 WOA?
You can check the full history of AY03 WOA by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was AY03 WOA registered?
AY03 WOA is a 2003 Ford Ranger, first registered on 1 March 2003.
Is AY03 WOA safe to buy?
The MOT history for AY03 WOA shows 33 tests with a 60.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does AY03 WOA have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on AY03 WOA. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.