2004 Ford Transit

Brake actuating linkage mounting repair covered in underseal (1.1.21 (e) (i))

Brake master cylinder/servo mounting repair covered in underseal (1.1.21 (e) (i))

Brake repair covered in underseal (1.1.21 (e) (i))

Covers Fitted On Sills, Arches and Steps (Inner & Outer) & Heavy Underseal

Engine Covers / Under-trays Fitted

Front Headlamp lens slightly defective (4.1.1 (b) (i))

Parking brake mechanism/associated mounting repair covered in underseal (1.1.21 (e) (i))

Subframe mounting repair covered in underseal (5.3.6 (a) (i))

Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Suspension spring mounting repair covered in underseal (5.3.6 (a) (i))

Under-chassis, Suspension, Exhaust & Brake components corroded.

Vehicle is Heavily Under-sealed.

Central Rear Vehicle structure is corroded but structural rigidity is not significantly reduced near doors (6.1.1 (c) (i))

Central Rear Vehicle structure is corroded but structural rigidity is not significantly reduced near doors (6.1.1 (c) (i))

Front Windscreen washer not working (3.5 (a))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Nail in tyre ()

nsf and osf bottom ball joint dust cover slightly deteriorated

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Windscreen wiper does not clear the windscreen effectively x2 (3.4 (b) (ii))

Nearside Front Nail in tyre ()

nsf and osf bottom ball joint dust cover slightly deteriorated

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Shock absorber has a serious fluid leak (2.7.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Shock absorber has a serious fluid leak (2.7.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Exhaust corroding

Front brake pads close to legal limit

Front suspension lower arm rear bushes splkitting

General underbody heavily corroded and holed

Various minor oil leaks

Wipers poor and splitting

Brake pipes corroding

Exhaust corroded

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Rear fog lamp not working (1.3.2b)

Offside Registration plate lamp not working (1.1.C.1d)

Springs corroding

general underbody corrosion

rear shock absorbers damp

Brake pipes corroding

Exhaust corroded

Springs corroding

general underbody corrosion

rear shock absorbers damp

Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Suspension arm synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Rear wheel bearing rough when rotated (2.6.1)

rear brake application uneven (3.7.B.2)

Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Suspension arm synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Body has slight corrosion (6.1.B.2)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Body has slight corrosion (6.1.B.2)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Registration plate lamp not working (1.1.C.1d)

Offside Front Track rod end ball joint has slight play (2.2.B.1f)

Registration plate lamp not working (1.1.5c)