2005 Yamaha TZR50

Offside right hand steering slightly reduced not affecting riders grip

fairing broken but still secure

Offside Steering control has reduced clearance at full lock not affecting the riders grasp of handlebars (2.1.2b)

all indicators flashing slightly fast but not exceeding 120 flashes per min

rear foot brake only just met minimum requirements

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Brake disc(s) securing bolt(s) missing (3.2.A1g)

Rear wheel spindle securing nut locking device missing (2.4.A.2b)

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Stop lamp does not illuminate immediately a brake applies Front brake (1.3.1a)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Drive chain worn but not considered excessive (6.2.1e)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear suspension bearing has slight free play (2.4.A2a(i))

Fuel cap mounting flange/sealing method defective (7.2.2c)

Headlamp insecure (1.2.3b)

Nearside Rear Footrest missing (6.2.1a)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Drive chain worn but not considered excessive (6.2.1e)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear suspension bearing has slight free play (2.4.A2a(i))

Steering movement slightly 'notchy' (2.2.1a)

Rear reflector on motorcycle missing (1.4.1)

Steering movement slightly 'notchy' (2.2.1a)

Headlamp aim too high (1.6)

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Chain guard insecure (6.2.1c)

Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars (2.1.2b)

Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars (2.1.2b)

Rear Floor brake test indicates a binding brake (3.3.C2c)

Rear Footrest missing (6.2.1a)

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Steering movement excessively stiff with the weight on the lower bearing (2.2.1a)