2006 Volvo S40

Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Nearside Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Windscreen washer provides insufficient washer liquid (3.5 (a))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Headlamp aim not tested due to nearside front lamp not working an offside front lamp misted (4.1.2 (b))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside main beam bulb incorrectly fitted

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside main beam bulb incorrectly fitted

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nail in nearside rear tyre

both front tyres inner edge wear

coil spring corroded (2.4.C.1b)

Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Tyre tread depth below requirements of 1.6mm (4.1.E.1)

coil spring corroded (2.4.C.1b)

Engine covers fitted obscuring some components in the engine bay

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)

Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Under-trays fitted obscuring some underside components

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

front tyres wearing on inner edges

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Engine covers fitted obscuring some components in the engine bay

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Rear Brake pad(s) wearing thin (3.5.1g)

Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Under-trays fitted obscuring some underside components

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

front tyres wearing on inner edges

Oil leak

Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Headlamp aim too high (1.8)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Oil leak

Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

front discs corroded on inner face