2008 Toyota Aygo

Front Anti-roll bar ball joint has slight play both sides (5.3.4 (a) (i))

Rear Coil spring corroded both sides (5.3.1 (b) (i))

Rear Parking (secondary brake) grabbing slightly both sides (1.3.1 (c))

Front Anti-roll bar ball joint has slight play both sides (5.3.4 (a) (i))

Front Headlamp aim too high both sides (4.1.2 (a))

Rear Coil spring corroded both sides (5.3.1 (b) (i))

Rear Parking (secondary brake) grabbing slightly both sides (1.3.1 (c))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Headlamp aim projected beam image is obviously incorrect both (4.1.2 (c))

Nearside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Windscreen washer not working (3.5 (a))

Nearside Rear Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) DANGEROUS

Rear Coil spring corroded both (5.3.1 (b) (i))

Nearside Front Headlamp are incorrectly positioned (4.1.4 (a))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Headlamp are incorrectly positioned (4.1.4 (a))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Suspension arm pin or bush excessively worn rear bush seperated (5.3.4 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement bottom arm/rear bush (5.3.4 (a) (i))

Rear Exhaust mounting defective and pipe cracked/leaking (6.1.2 (a))

Offside Rear Service brake excessively binding (1.2.1 (f))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Brake pipe excessively corroded both sides (1.1.11 (c))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement bottom arm/rear bush (5.3.4 (a) (i))

Rear Exhaust mounting defective and pipe cracked/leaking (6.1.2 (a))

Front both tyres worn on inner edges

Rear Brake pipe slightly corroded both @ flexy (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

O/s/f brake disc corroded.

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)